Intex Recreation Krystal Clear Filter Pump Manuel D’Utilisation

(110)  MODEL 634 FILTER PUMP  ENGLISH  7.5” X 10.5” PANTONE 295U  01/31/2007

1.

Remove the Krystal Clear™ filter pump and hoses from the packaging.

2.

Place the filter pump in a location for hose (8) connections to the plunger valve 
assemblies.
Note: Some regional regulations may require the filter pump to be 
mounted on a stationary platform. There are two mounting holes located 
in the pump base for this reason. Consult your local authorities for 
filter-pump mounting requirements.

3.

Grasp the two pump hoses (8) and connect the hose nuts to the filter pump.

4.

In a counter-clockwise motion unscrew the threaded filter housing collar (1) 
from the filter housing. Place it in a safe place.

5.

The Filter Pump is an airtight system. In a counter-clockwise motion turn both 
air release valves (2 & 7) 1 - 2 turns to open. DO NOT remove air release 
valves as water will expel with force if the motor is turned on and injury 
may occur.

Grasp and remove the filter housing cover (4). Check to see if a cartridge is 
inside the housing. If yes, replace the cover, finger tighten the housing collar (1)
back onto the filter housing.

7.

Gently finger tighten the sediment release valve located at the bottom of the 
housing to be sure that water does not leak out.

8.

When the pool is filled connect the hose from the bottom of the filter housing to
the highest strainer assembly. The hose connection is made at the bottom of 
the plunger valve assembly. Use the hose nut to attach the hose.

9.

Connect the 2nd hose to the middle of the motor housing and to the remaining 
liner connection.