Clarion DXZ935 Manuel D’Utilisation

DXZ935

1. Press the [A-M] button and select “BAL-

ANCE”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.

∗ The factory default setting is “0”. (Adjustment

range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

1. Press the [A-M] button and select “FADER”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.

∗ The factory default setting is “0”. (Adjustment

range: F12 to R12)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

1. Press the “BASS/TREB” mode. Each time

the [EQ] button is pressed, the adjusting item
“BASS” or “TREB” is changed cyclically.

2. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust “BAS/TREB”.

3. Press the [EQ] button to return to the previ-

ous mode.

∗ The Adjustment range is from –6dB to +6dB

for bass and treb.

∗ This parameter is reflected STD PRO mode

You can set up your favorite sound environment
using “Dolby Surround Pro logic 

II” or “AC-

II” so that you can enjoy a dynamic

sound of 5.1 ch surround or 4ch + 2ch speaker.
●Dolby Pro Logic II 5.1ch surround
Center SP +Front L.R. +Surround L.R. +Sub
Woofer.

To make the most of the sound field reproduc-
tion of Dolby Pro Logic 

II, a speaker system of

5.1 channel is recommendable. It has been also
designed so that a sound filed effect almost as
good as that of 5.1 channel reproduction can be
obtained even by a constitution of 4 channel + 1

channel (subwoofer).

If you using Dolby Pro Logic source and your
speaker is only four Front L.R. + Surround L.R.,
speaker setting will be better to CTR+SW and
CTR OFF, so Center channel divided to Front
L.R. automatically.

Note
• When SW-L + SW-R are chosen, audio output

from SW-L is not available in the PL II mode.

●AC-Processor II
Front L.R. + Rear L.R.+ Sub Woofer L.R. (4ch +
2ch)

To make the most of the sound field reproduc-
tion of AC-Processor 

II, a speaker system of 4

channel + 2 channel is recommendable.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

2. Press the [

a] or [d] button to select the

“SP-SETTING”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “SW L+SW R” or “CTR
+SW” mode.

Note:
• When CTR + SW are chosen, audio output from

CTR is not available except in the PL II mode.

Select PL

II Mode on and SP setting to

“CTR+SW” mode

1. Press and hold the [TITLE] button for 1 sec-

ond or longer.

2. Press the [

a] or [d] button to select the

“SP SEL”.

3. Press the [

] button to adjust the “CTR-

SP” “SUB W”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “ON” or “OFF”.

∗ This function is useful for Speaker Setting

Problems.

1. Select Dolby Pro Logic 

II or AC-ProII mode

and press and hold the [TITLE] button for 1
second or longer.

2. Press the [

a] or [d] button to select the

“FILTER”.

3. Press the [

] button to adjust the “SUB-W

LPF” or “HPF”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust filter frequency.