Clarion DXZ935 Manuel D’Utilisation

DXZ935

(Adjusts the correction 
 deviation of broadness) 

CAR WIDTH (Adjusts the correction 

 deviation of width inside 
 the car)

CAR LENG (Adjusts the correction 

 deviation of length inside 
 the car)

Adjusting AC-PII STD

AC-P

II STD makes natural stereo feeling for ev-

ery seat by virtual space enhancer.

VSE, which is room simulation, can correct the
sound pressure inside the car so that the uni-
form sound effect is obtained at any seats.

1. Select “VSE” menu which you want to edit on

the basis of.

2. Press and hold the [TITLE] button for 1 sec-

ond or longer.

3. Press the [

a] or [d] button to select item

to be adjusted.

There are “DIFFUSE”, “CAR WIDTH” and
“CAR LENG” available for the items to be
adjusted.

AC-Processor II Operations

5. Press and hold the [VSE] button for 1 second

or longer so that the POSITION effect is
turned on or off.

Adjusting AC-PII PRO

1. Select “VSE” menu which you want to edit on

the basis of.

2. Press and hold the [TITLE] button for 1 sec-

ond or longer.

3. Press the [

a] or [d] button to select item

to be adjusted.

∗ There are “TIME ALIGN” and “SP GAIN” avail-

able for the items to be adjusted.

4. Press the [

].

5. Press the [

a] or [d] button to select the

channel to be adjusted. Available channels
are: “FRONT-L”, “FRONT-R”, “REAR-L”,
“REAR-R”, “SW-L” and “SW-R”.

6. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

The adjustment of “TIME ALIGN” range is
from 0 cm to 500cm.

The adjustment of “SP-GAIN” range is from
0db to -20dB for each channel.

7. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-
tents.

∗ You can give a title to user memory. For the in-

putting method of titles, refer to the subsection
“Entering titles” in section “Operations com-
mon to each mode”.

There are 2 mode for sound EQ “P.EQ” mode
and “BASS/TREB” mode selecting EQUALIZ-
ING mode.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

2. Press the [

a] or [d] button to select the

“AC-P

II SEL”.

3. Press the [

] button to enter AC-Pro

II se-

lect mode “STD” or “PRO”.

4. Then press the [

a] or [d] button to select

the “EQ SEL”.

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “P.EQ” or “BAS/TREB”
mode.

6. Press the [TITLE] button to return to the pre-

vious mode.

∗ (Factory default setting is P.EQ)

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

The adjustment range is from 1 to 10 for
each item.

5. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-
tents.

∗ You can give a title to user memory. For the in-

putting method of titles, refer to the subsection
“Entering titles” in section “Operations com-
mon to each mode”.

Operation AC-PII PRO

Arrival time of sound from the speaker can be
selected from among five types according to the
position of the seat. In addition, Time Alignment
Function enables a pinpoint speaker setting to
obtain a uniform sound effect from speakers to
the listner.

1. Press the [VSE] button to enter POSITION mode.

2. Press the Band button to select “POS BASIC”.

3. Press the [DIRECT] button to select VSE

menu as below.

4. Press the [VSE] button to return to the previ-

ous mode.