Crosley Radio cr246 Manuel D’Utilisation

11

4

Getting Started

1

Remove packing materials from unit.

NOTE: Save all packing materials.

2

Remove plastic bag covering radio.

3

Remove plastic safety cover from A/C plug.

4

Remove tie from A/C cord and untie antenna

wire on back of radio.

5

Open lid and remove styrofoam shipping

material from turntable.

6

Remove black tie-wrap from under the tone

arm.

7

Remove tape and white protective needle cover

by gently pulling down off the tone arm.

8

Turn the TURNTABLE SUSPENSION SCREW

(28) clockwise until it is all the way down.

Do not force or over tighten it. This allows the

turntable to float on its shock absorbers.

9

Release tone arm hold down clip by gently 

pushing to the right. This will unlock tone arm

from its arm rest. Re-lock the hold down clip 

when moving the unit to another location.

1

Connect headphones to the Headphone Jack (13)

2

Adjust volume to the desired listening level.

NOTE: When using headphones, the sound to the unit 

speakers will be cut off.

This unit is designed to record CD-R and CD-RW

discs bearing the identification logo “Compact Disc

Recordable” or “CD-Rewritable”. If CD’s do not

conform to this standard, they may not record

properly.

1

Load a compatible blank CD-R or CD-RW into

the unit.

2

Press the FUNCTION button (2/63) to set the

unit to Phono mode.

3

Set the SPEED CONTROL SWITCH (32) to 

the correct speed (33 1/3, 45 or 78 rpm) for 

the selected record.

4

Use the CUE LEVER (30) to raise the tone 

arm off its rest. Move the tone arm over the 

record and use the cue lever to lower it to the

point you want the recording to start.

5

Press the CD RECORD button (7/50). “Record”

will show on the LCD. The CD will begin 

recording.

6

Once the first side of the record is finished, 

press the STOP(12/48) button. The display will

read “CLOSE TK” for two seconds and then 

change to “PHONO”.

7

Turn the record over and repeat steps 4-6 to 

record the other side.

8 

After recording is completed, press the STOP

(12/48) button. The display will read "CLOSE

TK" for two second and then change to

"PHONO".

9 

Once you have finished the recording, press 

the FINALIZE (5/54) button. The display will 

read "Finalize".

10 

Once the CD has been finalized, the unit will 

return to Phono mode and the display will show

"PHONO". The CD is now ready for use.

NOTE: If the CD is not finalized, it will not play in any

other CD player. Not all CD players are 

compatible with CD-R and CD-RW’s. Check 

the owner’s manual for other CD players for 
compatibility

.

CD Operation

The sound from all speakers is cut off.

AC

Polarized Plug

1

Unwind the AC POWER CORD (37) at the back

of the unit and connect it to a power outlet.

2

Plug A/C cord into appropriate outlet.

3

This product is equipped with a polarized

alternating current line plug (a plug having one

blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety

feature, If you are unable to insert the plug fully

into the outlet, try reversing the plug. If the plug

should still fail to fit, contact you electrician to

replace your obsolete outlet. Do not defeat the

purpose of the polarized plug.

NOTE: Headphones not included with unit.