Tascam DA-302 Manuel D’Utilisation
16
Section 5 : Recording
Dubbing means copying audio signals from Deck 1 to
Deck 2.
… The playback sound during dubbing is output from the
Deck 2.
… The playback sound during dubbing is output from the
ANALOG OUT and DIGITAL OUT connectors for
Deck 1 and Deck 2.
·For high-speed dubbing, signals are not output to the
Deck 1 and Deck 2.
·For high-speed dubbing, signals are not output to the
DIGITAL OUT connectors.
When high-speed dubbing is performed for a tape
recorded in the Long Play mode, no signal is output
to the ANALOG OUT connector as well.
When high-speed dubbing is performed for a tape
recorded in the Long Play mode, no signal is output
to the ANALOG OUT connector as well.
5-2-1. Making an identical tape including sub-
codes
1
Load the source tape in Deck 1 and the recording tape
in Deck 2.
in Deck 2.
2
Set the COMMON MODE switch to OFF.
3
Select the Dubbing mode with the DUB MODE key.
·For dubbing at high speed (2 times normal speed),
·For dubbing at high speed (2 times normal speed),
select DUB MODE HIGH and for dubbing at nor-
mal speed, select DUB MODE NORM.
mal speed, select DUB MODE NORM.
·A tape recorded in the Long Play mode can be
dubbed at high speed (4 times normal speed).
4
When the DUBBING key is pressed, the tapes in Deck
1 and Deck 2 are rewound, then dubbing starts.
1 and Deck 2 are rewound, then dubbing starts.
… To stop dubbing in the middle, press the STOP key on
Deck 1 or Deck 2.
5-2-2. Dubbing a tape from the middle
1
Set the COMMON MODE switch to OFF.
2
Select the DUB MODE APPEND with the DUB
MODE key.
MODE key.
3
Press the DUBBING key to start dubbing from that
point.
point.
5-2. Dubbing
5-2-3. Making a tape with the program order
changed
1
Set the COMMON MODE switch to OFF.
2
Select Deck 1 with the SELECT 1/2 key.
3
Follow the procedure in "6.6 Program playback" to
select the programs to be dubbed.
select the programs to be dubbed.
4
Set the Dubbing mode to DUB MODE PGM with the
DUB MODE key.
DUB MODE key.
5
Pressing the DUBBING key rewinds the tape in Deck
2 to the beginning of the tape, then starts dubbing
according to the program.
2 to the beginning of the tape, then starts dubbing
according to the program.
… To stop dubbing in the middle, press the STOP key on
Deck 1 or Deck 2.
… When the AUTO ID mode is engaged, a Start ID is
automatically recorded at the start of each program to
be recorded.
be recorded.