Coway BA13-BR Manuel D’Utilisation
18
InstaLLIng your BIdet
4. align the back of the bidet to the installation plate and push the bidet
backwards while pressing the button to the left of the bidet. (Hold the bidet
with both hands and push it backwards until it clicks into place).
check if the bidet moves to the left or right. if it moves, fasten the fixing nuts
again.
5. connect the bidet hose to the side of the bidet.
make sure that the bidet hose is firmly connected. if the main water supply valve
is opened when the hose is not connected properly, the bidet hose may become
separated and cause water to splash, resulting in injury.
take care that the bidet hose is not excessively bent by twisting it.
6. open the main water supply valve.
7. connect the power cord to the electrical outlet.
make sure to use a grounded electrical outlet. in the case of a short
circuit, grounding prevents electric shock or injury.
make sure to use a dedicated electrical outlet with grounding
terminals.
if using an extension cord is unavoidable, use one with grounding
terminals for 120 V~ / 60 Hz or higher.
caution
Installing the product
3. Place the fixing slider over the installation plate on the toilet, insert the
fixing bolts, and fasten the nuts so that the installation plate is fixed.
1210964 BA13 사용설명서_수출영문_(09.03.23).indd 18
2009.3.24 10:13:18 AM