M-AUDIO 24 Manuel D’Utilisation
MicroTrack 24/96 < User Guide
7
Left
15.
Menu Button: Will access the MicroTrack 24/96 menu and enter Loop Playback mode.
16.
Hold Switch: When active, all buttons on the MicroTrack 24/96 will be disabled. If you attempt to operate the MicroTrack 24/96 while the
Hold switch is on, “HOLD switch on” will be shown on the LCD display.
Hold switch is on, “HOLD switch on” will be shown on the LCD display.
17.
L/M/H Switch: Sets the operating mode of the 1⁄4” TRS and 1/8” inputs. Use the ‘L’ position for line-level devices. The ‘M’ position should be
used when recording from microphones. The ‘H’ position uses a higher gain stage on the 1⁄4” TRS inputs, which can help when recording
quiet signals or using microphones with low output levels. The ‘H’ position does not boost the input gain of the 1/8” input.
used when recording from microphones. The ‘H’ position uses a higher gain stage on the 1⁄4” TRS inputs, which can help when recording
quiet signals or using microphones with low output levels. The ‘H’ position does not boost the input gain of the 1/8” input.
18.
Phantom Power Switch: Switches on the phantom power for the 1⁄4” TRS inputs. When active, a “phantom power” icon will be shown on
the LCD display. Phantom power should only be used with condenser microphones.
the LCD display. Phantom power should only be used with condenser microphones.
3 - Hardware Controls and Indicators