Raritan Engineering MCCAT18 Manuel D’Utilisation
Chapter 4: Advanced Operation and System Configuration
21
Turn off AutoScan
Activate the OSD again and press Alt+F6.
Cycling Through Active Channels Only
You can choose to skip inactive channels through the OSD after the
AutoScan function is activated. Therefore, only active channels are
scanned.
AutoScan function is activated. Therefore, only active channels are
scanned.
1. (Optional) If the OSD is not onscreen, press the hot key twice
QUICKLY (default: Scroll Lock) to activate it.
2. Press F7 to activate the AutoSkip function.
3. The OSD disappears, indicating the system enters the AutoSkip
mode.
Turn off AutoSkip
Activate the OSD again and press Alt+F7.
Returning to the Previous Channel
MCCAT allows you to quickly return to the previously selected channel,
if any, by using a hot key without triggering the OSD or looking for the
corresponding button on the front panel.
if any, by using a hot key without triggering the OSD or looking for the
corresponding button on the front panel.
Requisite for performing this function:
You must have activated the “Previous Channel” function in the
Configuration Menu. Otherwise, the hot key will not work. See System
Configuration (on page 26) for details.
Configuration Menu. Otherwise, the hot key will not work. See System
Configuration (on page 26) for details.
Operation:
1. You accessed a specific channel (computer).
2. Then select a different channel by using the OSD or pressing the
channel button.
3. To switch back to the channel selected in Step 1, press the hot key
twice quickly (the hot key is the one you specified for the Previous
Channel Key field in the Configuration Menu).
Channel Key field in the Configuration Menu).
Now you are switched to the previously selected channel again.