Yamaha RX-V475 Manuel D’Utilisation

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

■

Configures the volume settings.

❑ Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and 
DTS signals) playback.

❑ Max Volume

Sets the maximum volume to prevent excessive loudness.

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

+16.5 dB

❑ Initial Volume

Sets the initial volume when the receiver is turned on.

❑ ZoneB Volume

(RX-V575 only)

Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A.

• If “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB. As necessary, 

adjust the volume using the remote control (p.62).

Configures the power supply settings.

■

Sets the amount of time for the auto-standby function. If you do not operate the unit for 
the specified time, the unit will automatically go into standby mode.

U.K. and Europe models: 8 hours

Other models: Off

• Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the 

front display.

Maximum (default)

Produces audio without adjusting the dynamic range.

Standard

Optimizes the dynamic range for regular home use.

Min/Auto

Sets the dynamic range for clear sound even at night or at low 
volumes.
When playing back Dolby TrueHD signals, the dynamic range is 
automatically adjusted based on the input signal information.

Off (default)

Sets the level to the volume level of the unit when it last entered 
standby mode.

Mute

Sets the unit to mute the audio output.

-80.0 dB to +16.5 dB 
(0.5 dB increments)

Sets the level to the specified volume level.

Sync. (default)

Adjusts the volume for Zone B in conjunction with the volume for 
Zone A.

Async.

Does not adjust the volume for Zone B in conjunction with the volume 
for Zone A. Adjust the volume for Zone B separately (p.62).

Off

Does not set the unit to standby mode automatically.

2 hours, 4 hours, 
8 hours, 12 hours

Sets the unit to standby mode when you have not operated the unit for 
the specified time. For example, when “2 hours” is selected, the unit 
will switch to standby mode if you do not operate it for 2 hours.