JVC RX-7520VBK Manuel D’Utilisation

By changing the transmittable signals, you can use the remote
control supplied for this unit to operate other manufacturers’
equipment.
• Refer also to the manuals supplied for the other products.
• To operate these components with the remote control, first you

need to set the manufacturers’ code each for TV, CATV converter,
VCR and DVD player.

• After replacing batteries of the remote control, set the

manufacturers’ codes again.

Now, you can perform the following operations on the TV.

:  Turn on or off the TV.

: Set the input mode (either TV or VIDEO).

: Adjust the volume.

: Change the channels.

After pressing TV SOUND (source selecting button), you can
use the following buttons on the TV:

1 – 10, +10 (100+) : Select a channel. +10 (100+) button will

function as the ENTER button if your
equipment requires pressing ENTER after
selecting a channel number.

Refer also to the manual supplied with your TV.

When your TV turns on or off, you have entered the correct
code.

If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.

TO BE CONTINUED TO THE NEXT PAGE

*

“01” is the initial setting.

JVC

01*

Hitachi

10

Magnavox

02

Mitsubishi

03

Panasonic

04, 11

RCA

05

Samsung

12

Sanyo

13

Sharp

06

Sony

07

Toshiba

08

Zenith

09

Now, you can perform the following operations on the CATV
converter.

: Turn on or off the CATV converter.

: Change the channels.

After pressing TV SOUND (source selecting button), you can
use the following buttons on the CATV converter:

1 – 10, +10 (100+) : Select a channel. +10 (100+) button will

function as the ENTER button if your
equipment requires pressing ENTER after
selecting a channel number.

Refer also to the manual supplied with your CATV converter.

EN30-42.RX-7520V[C]f.pm5

02.2.14, 4:33 PM

37