iHome iH14 Manuel D’Utilisation

iH10_14_IB_032107.fh10 3/21/07 8:00 AM Page 5 

3

Plug the AC adaptor cable into the 

 AC Adaptor Jack on the back of the unit and the other end into a standard 120VAC

wall outlet.

Your unit comes with 3 removable inserts to ensure your iPod fits properly in 

 Dock. Please see insert table on Quick Start

Section. USE PROPER INSERT TO AVOID DAMAGE TO iPOD OR UNIT.

1. Place proper insert for your iPod in 

 Dock, then gently dock iPod. When docked, iPod will charge until fully charged.

The iPod will not overcharge.

2. Turn the 

 Function Knob to iPod and press play on iPod to play.

3. Turn the 

 Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the  EXB

Switch to On for sound boost.

4. To switch off the unit, turn the 

 Volume Knob fully counter-clockwise.

Setting Up Antennas
1. Snap AM loop antenna into provided stand, then plug antenna cable into the 

 AM Antenna socket on back of the unit.

Move antenna 12” away from the unit and rotate it for best reception.

2. Extend FM Antenna (on back of unit) fully for best reception. Do not strip, alter or attach to other antenna.

Tuning and Playing the Radio
1. Turn the 

 Function Knob to AM or FM to select AM or FM radio band.

2. Turn the 

 Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the  EXB

Switch to On for sound boost.

3. Turn the 

 Tuning Knob to tune radio to the desired station.

4. To switch off the unit, turn the Volume Knob fully counter-clockwise.

1. Plug one end of the audio patch cord (included) into the headphone or line-out jack on your nondocking iPod or other

audio device and the other end of the patch cord into the 

  Aux-in Jack located on the back of the unit.

2. Turn the 

 Function Knob to AUX.

3. Turn the 

 Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the  EXB

Switch to On for sound boost.

4. To switch off the unit, turn the Volume Wheel fully counter-clockwise.

1. Plug your headphones into the 

 Headphones Jack located on the back of the unit for private listening to any selected

function (iPod, radio or aux). Speaker output is disabled when headphones are plugged in.

2. Turn the 

 Volume Knob clockwise to turn on the unit (Power On LED will light) and adjust the volume. Set the  EXB

Switch to On for sound boost.

3. To switch off the unit, turn the Volume Knob fully counter-clockwise.