Panasonic RQT9223 Manuel D’Utilisation
31
RQT9223
Convenient functions
Remote contr
olling sound eff
ects / Con
venient functions
Operations
Adjusting speaker volumes
Adjust speaker output to balance front speaker sounds with those from each of the other
speakers in the seating area.
speakers in the seating area.
• Press [SPEAKERS A] on the unit to switch “
A
” on.
• Press [SPEAKERS A] or [SPEAKERS B] to switch “
A
B
” on when bi-wire speakers
are connected.
(If you select “SPEAKERS B” only, the test signal will not be output.)
1. Press [INPUT SELECTOR] to select an input source which is
not connected.
• Or stop the playback of connected equipment.
2. Press [VOL
+, –] to adjust the volume range
between –30dB and –35dB.
3. Press [–AUTO, TEST].
• Speakers are displayed in the following order.
SB
LS
SUBW
RS
C
L
R
SBR
SBL
LS
SUBW
RS
C
L
R
(If you connect one surround back
speaker)
• Connected speakers output the test signal.
L : Front left, C : Center, R : Front right , RS : Surround right, SBR : Surround back
right,
right,
SBL : Surround back left, SB : Surround back (If you connect one surround
back speaker),
LS : Surround left, SUBW : Subwoofer
How speakers are displayed
4. Press [e] [r] to adjust the speaker volume when the test
signal is being output from the speaker to adjust.
• To shift the test signal output to next speaker, press [q].
Adjustment range:
–20 dB to +10 dB
Factory setting:
0 dB
SUBW only:
MIN (minimum), 1 to 29, MAX (maximum)
Factory setting:
MIN (minimum), 1 to 29, MAX (maximum)
Factory setting:
20
5. Press [–AUTO, TEST] to finish.
6. Lower the volume to the normal listening level using
6. Lower the volume to the normal listening level using
[VOL
+, –].
Note
• The front speakers cannot be adjusted with this operation. To adjust the front speaker
volumes, press [VOL
+, –].
• To adjust the volume balance of left and right front speakers, see “Balancing front speaker
volume” (➔ page 35).
Silencing speakers temporarily
Press [MUTING].
• “
MUTING ” flashes while muting is activated.
• Press the button again to cancel the operation.
• Muting is cancelled when you turn the unit off or adjust the volume.
• Muting is cancelled when you turn the unit off or adjust the volume.
Displaying the current status
1. Press [INPUT SELECTOR].
2. Press [DISPLAY].
• The sound volume, SFC setting and Digital input (terminal name/format) scroll in turn across
the display.
• When the unit is receiving a dual audio signal, the reception status is displayed (➔ page 35).
• Preset channel number is also displayed when the preset channel is tuned (➔ page 48).
• When you press [DISPLAY] halfway in this process, the next item to the current display appears.
• Preset channel number is also displayed when the preset channel is tuned (➔ page 48).
• When you press [DISPLAY] halfway in this process, the next item to the current display appears.
TV/VIDEO
ENTER
SUB MENU
S
or
SA-BX500-PP (RQT9223-Y)_En.indd 31
6/27/2008 4:06:02 PM