Manualsbrain.com
  1. Manuels
  2. Marques
  3. ONKYO
  4. TX-SR603/603E
  5. Manuel D’Utilisation

ONKYO TX-SR603/603E Manuel D’Utilisation

Télécharger
Page de 92
 
44
 
First Time  Setup
 
—Continued
 
Component Video Setup
 
If you connect to a COMPONENT VIDEO IN, you must 
assign it to an input selector. For example, if you connect 
your DVD player to COMPONENT IN 3, you should 
assign it to the DVD input selector.
If you want to output composite and S-Video sources 
from the COMPONENT VIDEO OUT, select VIDEO, 
as explained below.
 
Note:
 
This procedure can also be performed on the AV receiver 
by using its [SETUP] button, arrow buttons, and 
[ENTER] button.
 
Minimum Speaker Impedance
 
(not North American models)
 
If the impedance of any of the connected speakers is 4 
ohms or more, but less than 6 ohms, set the Minimum 
Speaker Impedance to “4 ohms.”
 
Note:
 
Before you change this setting, turn down the volume.
 
Input selector
VIDEO IN jack
 
DVD
IN 1
VIDEO 1
IN 2
VIDEO 2
IN 3
VIDEO 3
VIDEO
VIDEO 4
VIDEO
 
1
 
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
 
The main menu appears onscreen.
 
2
 
Use the Up and Down [
]/[
] 
buttons to select “0. Initial 
Setup,” and then press [ENTER].
 
The Initial Setup menu appears.
 
3
 
Use the Up and Down [
]/[
] 
buttons to select an input selec-
tor, and then use the Left and 
Right [
]/[
] buttons to select:
 
IN1:
 
  Use the video component 
connected to COMPO-
NENT VIDEO IN 1.
 
IN2:
 
  Use the video component 
connected to COMPO-
NENT VIDEO IN 2.
 
IN3:
 
  Use the video component 
connected to COMPO-
NENT VIDEO IN 3.
RECEIVER
ENTER
ENTER
ENTER
 
VIDEO:
 
  Output composite video 
and S-Video sources from 
the COMPONENT 
VIDEO OUT.
 
4
 
Press the [SETUP] button.
 
The setup menu closes.
This setting is not set automatically by the Automatic 
Speaker Setup function (see page 39).
2, 3
1, 4
2
1