ONKYO TX-NR626 Manuel D’Utilisation

To achieve a wireless network connection, it is 
necessary to perform the wireless LAN setup. The 
setup can be done either automatically or manually.
You use your AV receiver as a wireless client 
(wireless terminal) and connect it to a PC or to the 
Internet.

A wireless LAN (WLAN) is a local area network that 
relies on wireless communication.
To achieve a wireless network connection, you will 
need the following component:

■

Also known as the base station, it links your AV 
receiver (wireless client) with a PC or network. 
Access points fall into two categories: the bridge 
type that only performs data relay in a local area 
network, or the router type that has a built-in router 
functionality.

e/r or q/w to select “Setup”, and then 

q/w to select “Hardware Setup”, and then 

q/w to select “Network”, and then press 

q/w to select “Network Connection”, and 

e/r to select “Wireless”, and then press 
ENTER (

The “Wireless Setup” menu is displayed on 
screen.

• The same setting is available even if “Wireless” is 

selected in “Network Connection” in initial setup 
(

q/w to select (North American models) 

/(excluding North American 

models) “Push Button Configuration (Select 
from Router)”, and press ENTER.
The method to make settings by “Push Button 
Configuration” is displayed, providing the 
following two options:

*1

(North American models) To connect to Linksys 
E/EA Router, select “Push Button Configuration 
(Linksys E/EA Router)” and make settings 
following the instructions on the screen.

■

1. Use 

q/w to select “Push Button” and then 

press ENTER.

2. Press the WPS button on your Access Point 

device.

• How long the WPS button should be pressed differs 

depending on the type of Access Point device. Refer 
to the instruction manual provided with your Access 
Point device for operations.

■

1. Use 

q/w to select “PIN Code” and then press 

ENTER.
An 8-digit PIN code is displayed. The PIN 
code is displayed scrolling on the AV 
receiver’s display.

2. Input the provided code in your Access Point.

For information on the registration process, 
please refer to the instruction manual 
provided with your Access Point device.

Press ENTER to confirm.
Connection to your Access Point starts and Wi-Fi 
indicator flashes. After the connection to your 
Access Point is completed, Wi-Fi indicator lights 
and the connection status is displayed on the 
screen.
This completes the wireless LAN setup.
You can review your setup with the “Status” 
option on the “Wireless Setup” menu.

• If Wi-Fi indicator doesn’t light, the connection to your 

Access Point is not done successfully. Configure this 
setting again (

).