ONKYO TX-NR3009 Manuel D’Utilisation

En

On the “Monitor Out” settings, you can select whether or 
not to have the video sources’ images output through the 
HDMI output.
If you connect your TV to HDMI output, “Monitor Out” 
setting is automatically set and composite video, S-Video, 
and component video sources are upconverted

*

 and 

output.

If you connect your TV to the COMPONENT VIDEO 
MONITOR OUT (not the HDMI output), “Monitor Out” 
setting is automatically set and composite video and 
S-Video sources are upconverted

*

 and output.

• See “Video Connection Formats” (

) for charts 

showing how the “Monitor Out” and “Resolution” settings 
affect the video signal flow through the AV receiver.

■

`

Analog:

Select this if your TV is connected to the 
COMPONENT VIDEO MONITOR OUT, 
MONITOR OUT S, or MONITOR OUT V.

`

HDMI Main:

Select this if your TV is connected to HDMI OUT 
MAIN.

`

HDMI Sub:

Select this if your TV is connected to HDMI OUT 
SUB.

`

Both:

Select this if your TVs are connected to HDMI OUT 
MAIN and HDMI OUT SUB. Video signals are 
output from both HDMI outputs at the resolution 
supported by both TVs.

`

Both(Main):

Select this if your TVs are connected to HDMI OUT 
MAIN and HDMI OUT SUB. Video signals are 
output from both HDMI outputs but HDMI OUT 
MAIN will become a priority; depending on the 
resolution, video signals may not be output from 
HDMI OUT SUB.

`

Both(Sub):

Select this if your TVs are connected to HDMI OUT 
MAIN and HDMI OUT SUB. Video signals are 
output from both HDMI outputs but HDMI OUT 
SUB will become a priority; depending on the 
resolution, video signals may not be output from 
HDMI OUT MAIN.

• If not connected to the same output you have selected in the 

“Monitor Out” setting, the “Monitor Out” setting will be 
automatically switched to “Analog”.

• When using the DeepColor function, if the “Monitor Out” 

setting is set to “Both(Main)” or “Both(Sub)”, the number of 
bits may be limited due to the capability of your TV connected 
to a priority output.

■

`

*1

:

Select this to pass video through the AV receiver at 
the same resolution and with no conversion.

`

*2

:

Select this to have the AV receiver automatically 
convert video at resolutions supported by your TV.

`

480p (480p/576p), 720p, 1080i, 1080p

*2

:

Select the desired output resolution.

`

*2*3

:

Select this for 1080p output at 24 frames per second.

`

*2*3

:

Select this for an output resolution four times that of 
1080p, resulting in 3840 × 2160 pixels.

`

Source:

Output will be according to the resolution level 
which was set in the “Picture Adjust” (

You can specify the output resolution for the HDMI 
output(s) and COMPONENT VIDEO MONITOR OUT 
so that the AV receiver upconverts the picture resolution 
as necessary to match the resolution supported by your 
TV.

Composite video, S-Video, 

component video

HDMI

HDMI

Composite video, S-Video, 

component video

Composite video, S-Video

Composite video, S-Video

Component video

Component video

The current setting is displayed.

`

Analog, HDMI Main, HDMI Sub, Both, 
Both(Main) or Both(Sub)