ONKYO TX-NR3009 Manuel D’Utilisation

En

■

To use a Web proxy, enter its URL here.

■

If you’re using a Web proxy, enter a proxy port number 
here.

■

`

`

This setting enables or disables control over the network.

• When set to “Enable”, the NET indicator is dimly-lit and the 

power consumption slightly increases in standby mode.

■

`

“49152” to “65535”

This is the network port used for control over the network.

• When the “Network Control” setting is set to “Disable”, this 

setting is cannot be selected.

See “Firmware Update” for the update procedure 
(

).

• Perform the firmware update only when such an announcement 

is posted on the Onkyo web site. Visit the Onkyo web site for the 
latest information.

• It takes maximum 60 minutes to complete the firmware update.

■

Displays the current version of the firmware.

■

`

via NET:

Performs the firmware update via Internet. Check 
the network connection before updating.

`

via USB:

Performs the firmware update from a USB device.

These settings allow you to update the AV receiver’s 
firmware. Do not shutdown the power of the AV receiver 
while updating.

■

`

via NET:

Performs the firmware update via Internet. Check 
the network connection before updating.

`

via USB:

Performs the firmware update from a USB device.

These settings allow you to update Onkyo dock’s 
firmware. Do not shutdown the power of the AV receiver 
while updating.

• This update shall not be performed when no dock is connected 

to the UNIVERSAL PORT jack.

).

Via onscreen menu, you can specify what actions will be 
taken by the Easy macro command in the Easy macro 
mode (

).

First, select the ACTIVITIES (MY MOVIE, MY TV, or 
MY MUSIC) that you want to configure.

■

`

BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, 
AUX, TUNER, TV/CD, PHONO, PORT, NET, 
USB

With this setting, you can choose the target input source of 
the Easy macro.

■

`

`

With this setting, you can specify whether or not to turn on 
your TV.

■

`

`

With this setting, you can specify whether or not to turn on 
the source component.

■

`

`

With this setting, you can specify whether or not to turn on 
the AV receiver.

■

`

`

With this setting, you can specify whether or not to change 
the input source.

■

`

`

With this setting, you can specify whether or not to start 
playback.