ONKYO tx-nr545 Manuel D’Utilisation

Advanced Settings (Setup Menu)

Sleep Timer

Off

Select to turn the unit into standby mode 

automatically when the specified time elapses. 

Select a value between "10 min" to "90 min".

"Off": Select if you do not want the unit to 

automatically switch to standby.

Auto Standby

On/Off

This setting places the unit on standby 

automatically after 20 minutes of inactivity 

without any video or audio input.

"On": The unit will automatically enter standby 

mode ("ASb" will light).

"Off": The unit will not automatically enter 

standby mode.

● "Auto Standby" is appeared on the display 

and TV screen 30 seconds before the Auto 

Standby comes on.

● "Auto Standby" does not work when Zone 2 

is active.

● Default values vary depending on the 

regions.

Auto Standby in 

HDMI Standby 

Through

Off

Enable or disable "Auto Standby" while "HDMI 

Standby Through" is on.

"On": The setting will be enabled.

"Off": The setting will be disabled.

● This setting cannot be set to "On" if "Auto 

Standby" is set to "Off".

USB Power Out at 

Standby

Off

When this function is "On", you can still have 

equipment connected to the USB port supplied 

with power even when this unit is in standby.

● When this function is being used, the power 

consumption increases even when the unit 

is on standby. However, the increase in 

power consumption is kept to a minimum 

by automatically entering the HYBRID 

STANDBY mode, where only the essential 

circuit is operating.

Network Standby

Off

When this function is "On", you can turn on 

the power of the unit via network using an 

application such as Onkyo Remote.

● When "Network Standby" is used, the power 

consumption increases even when the unit 

is on standby. However, the increase in 

power consumption is kept to a minimum 

by automatically entering the HYBRID 

STANDBY mode, where only the essential 

circuit is operating.

Bluetooth Wakeup

Off

This function wakes up the unit on standby by 

connecting a Bluetooth-enabled device.

"On": Use this function

"Off": Do not use this function

● Setting to "On" increases the power 

consumption even when the unit is on 

standby. However, the increase in power 

consumption is kept to a minimum by 

automatically entering the HYBRID 

STANDBY mode, where only the essential 

circuit is operating.

● This setting is fixed to "Off" if "Bluetooth" - 

"Auto Input Change" is set to "Off".

● Wait for a while if "Network Standby" or "Bluetooth Wakeup" cannot be selected. It will appear when 

the network function is started up.