ONKYO TX-SR803 Manuel D’Utilisation

 

33

 

• With connection 

, you can listen to and record audio from the CD player and listen in Zone 2.

• To connect the CD player digitally, use connection 

 or 

. (For recording, use 

 and 

, or 

 and 

.)

The AV receiver’s PHONO IN is for use with a moving 
magnet (MM) type cartridge.
Use an analog audio cable to connect the AV receiver’s 
PHONO IN L/R jacks to the audio output on your turn-
table.

 

• If your turntable has a ground wire, connect it to the 

AV receiver’s GND screw. With some turntables, con-
necting the ground wire may produce an audible hum. 
If this happens, disconnect it.

• If your turntable has a moving coil (MC) type car-

tridge, you’ll need a commercially available MC head 
amp or MC transformer. Connect your turntable to the 
head amp or transformer, and connect that to the AV 
receiver’s PHONO IN L/R jacks.

• You can also use a phono equalizer to connect a turn-

table with an MC-type cartridge. See the phono equal-
izer’s manual for details.

 

CD IN L/R

 

⇐

 

Analog audio L/R output

DIGITAL COAXIAL IN 2

 

⇐

 

Digital coaxial output

DIGITAL OPTICAL IN 3

 

⇐

 

Digital optical output

Step 1:
Choose a connection that matches your CD player (

, 

, or 

), and then make the connection.

Connect one

or the other

TX-SR803_En.book Page 33 Friday, August 26, 2005 9:26 AM