ONKYO TX-NR801 Manuel D’Utilisation

11

Index Parts and Facilities—Continued

For more information regarding connection procedures, 
see pages indicated in brackets [  ].

1

DIGITAL IN/OUT [21-24]
These jacks are for connecting components with 
digital input and output capabilities. To connect a 
CD player, see page 23; to connect an MD or CD 
recorder, see page 24; to connect a DAT deck, see 
page 24; to connect a DVD player, see page 21; to 
connect a DVD recorder, see page 22; and to con-
nect a digital satellite tuner, see page 22.

2

PRE OUT [18, 25, 66]
To use the TX-NR801/TX-NR801E as a preampli-
fier, connect a power amplifier to this jack.

3

ANTENNA [14]
These jacks are for connecting the FM indoor 
antenna and the AM loop antenna that are supplied 
with the TX-NR801/TX-NR801E.

4

ZONE 2 VIDEO OUT [21, 66]
This jack is for connecting the component that will 
be used in the remote zone (Zone 2). 

5

MONITOR OUT VIDEO/S VIDEO [20]
These jacks are for connecting to the video input 
jacks on television monitors or projectors.

6

COMPONENT VIDEO OUTPUT [20]
These jacks are for connecting to the component 
video input jacks on television monitors or projectors.

7

ETHERNET (Net-Tune) [71]
This connector is for connecting to an Ethernet network.

8

SPEAKERS [18, 66]
These terminals are for connecting the speakers.

9

AC OUTLETS [24]
This AC outlet is provided to plug in the power cord 
from another component. The shape and number of 
the AC outlet depend on the shipping destination.

0

MULTI CH INPUT [64]
This connector is for connecting components with a 
multichannel output.

A

PHONO/CD/TAPE AUDIO IN/OUT [23, 24]
These connectors are for connecting to the audio 
input and output jacks on audio components. To 
connect a turntable, see page 24; to connect a CD 
player, see page 23; and to connect a cassette tape 
deck, MD recorder, or CD recorder, see page 24.

B

DVD/VIDEO1-4 IN/OUT [21, 22]
These connectors are for connecting to the video 
input and output jacks on video components. To 
connect a DVD player, see page 21; to connect a 
DVD recorder, see page 22; to connect a VCR, see 
page 21; and to connect a digital satellite tuner, see 
page 22.

C

COMPONENT VIDEO INPUT1/2 [21, 22]
These connectors are for connecting to the compo-
nent video outputs of video components that have 
them. To connect a DVD player, see page 21; to 
connect a DVD recorder, see page 22; and to con-
nect a digital satellite tuner, see page 22.

D

IR IN/OUT [69]
These connectors are for connecting the remote sen-
sor of a multi-room kit (sold separately).

E

This jack is for connecting other Onkyo compo-
nents equipped with the same 

 terminal. The 

audio connection cables must also be connected.

F

VOLTAGE SELECTOR [7] (Worldwide models 
only)
This is only available on the worldwide model. 
Before connecting the power cord to the wall outlet, 
be sure to set this to the correct power supply volt-
age for your region.