ONKYO TX-NR801 Manuel D’Utilisation
38
Configuring Input Settings Suitable for Your Connections—Continued
Video Setup Sub-menu
When the default input settings does not suit your con-
nection, perform the following procedures to configure
your input settings.
nection, perform the following procedures to configure
your input settings.
a. Video
This setting allows you to match the audio from one
component with the video from another. Therefore, you
can set a video source to be displayed while the audio
from another input source is heard. For example, this
allows you to play the music from a compact disc, while
displaying the picture from a video cassette player or
other video source.
The default settings are given below.
This setting allows you to match the audio from one
component with the video from another. Therefore, you
can set a video source to be displayed while the audio
from another input source is heard. For example, this
allows you to play the music from a compact disc, while
displaying the picture from a video cassette player or
other video source.
The default settings are given below.
The settings in this sub-menu apply to the video and S
video signals. Available options for the video source to
be displayed are “DVD,” “VIDEO 1” to “VIDEO 5,”
“Last Valid” and “----.”
DVD, VIDEO 1-5: Select either the video signal from
the VIDEO or S VIDEO terminal for each video input.
Last Valid: Select to have the video of the previous
input source continued. For example, if the selected
video signals. Available options for the video source to
be displayed are “DVD,” “VIDEO 1” to “VIDEO 5,”
“Last Valid” and “----.”
DVD, VIDEO 1-5: Select either the video signal from
the VIDEO or S VIDEO terminal for each video input.
Last Valid: Select to have the video of the previous
input source continued. For example, if the selected
input source is VIDEO 1, and you then change to CD
(set to “Last Valid”), then the audio from the CD input
is played while the video from VIDEO 1 continues.
----: Set this option when you do not want any video
inputs to be displayed.
(set to “Last Valid”), then the audio from the CD input
is played while the video from VIDEO 1 continues.
----: Set this option when you do not want any video
inputs to be displayed.
b. Component Video
Use this setting if you connect monitors like TV to the
COMPONENT VIDEO OUTPUT jacks on the
TX-NR801/TX-NR801E.
The default settings are given below.
Use this setting if you connect monitors like TV to the
COMPONENT VIDEO OUTPUT jacks on the
TX-NR801/TX-NR801E.
The default settings are given below.
For example, when you connect the DVD player to the
COMPONENT VIDEO INPUT 2 jacks, select “DVD”
as input source and set “b. Component Video” to
“INPUT 2.”
Available component video inputs are “INPUT 1,”
“INPUT 2,” “VIDEO*,” “Last Valid,” and “None*.”
INPUT 1: The video signals from devices connected to
the INPUT 1 of the COMPONENT VIDEO input banks
are used.
INPUT 2: The video signals from devices connected to
the INPUT 2 of the COMPONENT VIDEO input banks
are used.
VIDEO*: The video signals assigned in the “a. Video”
sub-menu setting are used. This option is useful when
no devices are connected to the INPUT 1 and INPUT 2
of the COMPONENT VIDEO input banks.
Last Valid (enables the source last selected): Select to
have the video of the previous input source continued.
None*: No video signals are assigned. When you select
“None,” the OSD screen disappears. If you want to
change this setting later on, use the front panel display
on the TX-NR801/TX-NR801E.
COMPONENT VIDEO INPUT 2 jacks, select “DVD”
as input source and set “b. Component Video” to
“INPUT 2.”
Available component video inputs are “INPUT 1,”
“INPUT 2,” “VIDEO*,” “Last Valid,” and “None*.”
INPUT 1: The video signals from devices connected to
the INPUT 1 of the COMPONENT VIDEO input banks
are used.
INPUT 2: The video signals from devices connected to
the INPUT 2 of the COMPONENT VIDEO input banks
are used.
VIDEO*: The video signals assigned in the “a. Video”
sub-menu setting are used. This option is useful when
no devices are connected to the INPUT 1 and INPUT 2
of the COMPONENT VIDEO input banks.
Last Valid (enables the source last selected): Select to
have the video of the previous input source continued.
None*: No video signals are assigned. When you select
“None,” the OSD screen disappears. If you want to
change this setting later on, use the front panel display
on the TX-NR801/TX-NR801E.
*Valid only when the PAL format is used in an area other than
USA, Canada and Australia.
USA, Canada and Australia.
Note (When the model is for USA, Canada or Austra-
lia and its TV format is PAL):
When the component video signal is output, the infor-
mation on the NET AUDIO and Immediate Display (see
page 63) will not be displayed.
lia and its TV format is PAL):
When the component video signal is output, the infor-
mation on the NET AUDIO and Immediate Display (see
page 63) will not be displayed.
Input source selected
Multichannel
CD
No
PHONO
No
TUNER
No
TAPE No
DVD
Yes
VIDEO 1
No
VIDEO 2
No
VIDEO 3
No
VIDEO 4
No
VIDEO 5
No
Input source selected
Video
CD
Last Valid
PHONO
Last Valid
TUNER
Last Valid
TAPE Last
Valid
DVD
DVD
VIDEO 1
VIDEO 1
VIDEO 2
VIDEO 2
VIDEO 3
VIDEO 3
VIDEO 4
VIDEO 4
VIDEO 5
VIDEO 5
NET AUDIO
Last Valid
2-3.Video Setup
a.Video
a.Video
:DVD
b.Component Video
:INPUT1
:INPUT1
Quit:[SETUP]
Input:DVD
Input source selected
Component video input
CD
Last Valid
PHONO
Last Valid
TUNER
Last Valid
TAPE Last
Valid
DVD
INPUT 1
VIDEO 1
INPUT 2
VIDEO 2
INPUT 2
VIDEO 3
INPUT 2
VIDEO 4
INPUT 2
VIDEO 5
INPUT 2
NET AUDIO
Last Valid