ONKYO TXNR525 Manuel D’Utilisation

a Menu selection
b Setting target
c Setting options (default setting underlined)

If you connect a video component to an HDMI input, 
you must assign that input to an input selector. For 
example, if you connect your Blu-ray Disc/DVD player 
to HDMI IN 2, you must assign “HDMI2” to the 
“BD/DVD” input selector.
Here are the default assignments.

■

BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD

`

HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6:

Select the input to which the component has 
been connected.

`

- - - - -:

Select if you’re not using the HDMI OUT.

Each HDMI input cannot be assigned to two input 
selectors or more. When HDMI1 - HDMI6 have 
already been assigned, you must first set any 
unused input selectors to “- - - - -” or you will be 
unable to assign HDMI1 - HDMI6 to other input 
selectors.

• If no video component is connected to the HDMI input (even 

if the HDMI input is assigned), the AV receiver selects the 
video source based on the setting of “2. Component 
(Component Video Input)”.

• When an HDMI IN is assigned to an input selector as 

explained here, the same HDMI IN will be set as a priority 
in the “3. Digital Audio (Digital Audio Input)” (

). In 

this case, if you want to use the coaxial or optical audio 
input, make the appropriate selection in the “Audio 
Selector” setting (

).

• Do not assign an HDMI IN to the TV/CD selector while 

“HDMI CEC (RIHD)” is set to “On” (

), otherwise 

appropriate CEC (Consumer Electronics Control) operation 
will not be guaranteed.

• If you assign “- - - - -” to an input selector that is currently 

selected in “HDMI Through” (

), the “HDMI 

Through” setting will be automatically switched to “Off”.

11. Network 
Setup
(

)

DHCP [IP Address, Subnet Mask, 
Gateway, DNS Server]

Proxy URL [Proxy Port]

■

`

Yes 

`

a 

b 
c 

Menu

Setting target