ONKYO TXNR525 Manuel D’Utilisation

■

`

10 kHz/200 kHz: 

`

9 kHz/50 kHz:

Select the frequency step according to your 
area.

■

`

10 kHz:

`

9 kHz: 

Select the frequency step according to your 
area.

For AM/FM tuning to work properly, you must specify 
the AM/FM frequency step used in your area. 

• When this setting is changed, all radio presets will be deleted. 

■

`

`

When “Auto Standby” is set to “On”, the ASb 
indicator lights and the AV receiver will automatically 
enter standby mode if there is no operation for 30 
minutes with no audio and no video signal input.
“Auto Standby” will appear on the AV receiver’s 
display and OSD 30 seconds before the Auto 
Standby comes on.
Default setting: On (European, Australian and 
Asian models), Off (North American and 
Taiwanese models)

• Set to “

On”

, the Auto Standby function may activate itself 

during playback with some sources.

• The  Auto

 

Standby function does not work when Zone 2 is on.

■

`

Off 

`

This setting enables or disables the Auto Standby 
during HDMI Through by detecting the audio/video 
input signal.
When this setting is set to “On”, the AV receiver will 
automatically enter standby mode if there is no audio 
and no video signal input during HDMI Through for 30 
minutes. (The Auto Standby function does not work 
when Zone 2 is on.)
When this setting is set to “Off”, the status of HDMI 
Through is continued regardless of audio/video input 
signal.

• Entering standby mode is possible by setting “HDMI CEC 

(RIHD)” to “On” and using CEC-compatible component 
regardless of the above-mentioned setting. 
See “HDMI CEC (RIHD)” in “10. HDMI Setup” for linked 
operation.

• When the HDMI Through is enabled, the power 

consumption slightly increases.

• This setting is fixed to “Off” when “Auto Standby” is set to 

“Off”.

■

`

Off 

`

Turn this setting on to allow 

p

-compatible 

components connected via HDMI to be controlled by 
the AV receiver (

• When the setting is set to “On” and the menu is closed, the 

names of connected 

p-compatible components and 

“RIHD On” are displayed on the AV receiver.
“Search…” 

→ “(name)” → “RIHD On”

When the AV receiver cannot receive the name of the 
component, it is displayed as “Player

” or “Recorder

”, etc 

(“

” shows up and indicates the number of components, 

when two or more are received).

• When an 

p-compatible component is connected to 

the AV receiver via an HDMI cable, the name of the 
connected component is displayed on the AV receiver’s 
display. For example, while you are watching TV 
broadcasting, if you operate a Blu-ray Disc/DVD player 
(being powered on) with the remote control of the AV 
receiver, the name of the Blu-ray Disc/DVD player will be 
displayed on the AV receiver.

• Set it to 

“

”

 when a connected piece of equipment is not 

compatible or it is unclear whether the equipment is 
compatible or not.

• If operation is not normal when set to 

“

”

, change the 

setting to 

“

”

.

• Refer to the connected component’s instruction manual for 

details.

• When the “HDMI CEC (RIHD)” setting is set to “On”, the 

power consumption in standby mode slightly increases. 
(Depending on the TV status, the AV receiver will enter 
standby mode as usual.)

• When the source equipment is connected with the 

u 

connection, it may malfunction if “HDMI CEC (RIHD)” is set 
to “On”.