Pioneer VSX-820 Manuel D’Utilisation

En

No picture or sound.

• If the problem still persists when connecting your HDMI component 
directly to your monitor, please consult the component or monitor 
manual or contact the manufacturer for support.

No picture.

• Video signals that are input from the analog video terminal will not 
output from the HDMI terminal. Signals that are input from the HDMI 
terminal will not output from the analog video terminal. Be consistent 
with the type of cable between input and output.
• Depending in the output settings of the source component, it may be 
outputting a video format that can’t be displayed. Change the output 
settings of the source, or connect using the component or composite 
jacks.
• This receiver is HDCP-compatible. Check that the components you are 
connecting are also HDCP-compatible. If they are not, please connect 
them using the component or composite video jacks.
• Depending on the connected source component, it’s possible that it 
will not work with this receiver (even if it is HDCP-compatible). In this 
case, connect using the component or composite video jacks between 
source and receiver.
• If video images do not appear on your TV or flat panel TV, try adjusting 
the resolution, Deep Color or other setting for your component.
• To output signals in Deep Color, use an HDMI cable (High Speed 
HDMI

 Cable) to connect this receiver to a component or TV with the 

Deep Color feature.

OSD does not appear.

• The OSD will not appear if you have connected using the HDMI output 
to your TV. Use component or composite connections when setting up 
the system.

No sound, or sound 
suddenly ceases.

• If you’ve made separate connections for audio, make sure you have 
assigned the analog/digital jack(s) to the corresponding HDMI input for 
the component. 
• Check the audio output settings of the source component.
• Check that the Audio Parameter setting is set to 

(refer to page 39).
• If the component is a DVI device, use a separate connection for the 
audio.
• HDMI format digital audio transmissions require a longer time to be 
recognized. Due to this, interruption in the audio may occur when 
switching between audio formats or beginning playback.
• Turning on/off the device connected to this unit’s HDMI OUT terminal 
during playback, or disconnecting/connecting the HDMI cable during 
playback, may cause noise or interrupted audio.

VSX-820_UCSMXCN_En.book  71 ページ  ２０１０年４月１２日　月曜日　午後５時１９分 71