Pioneer VSX-919AH-K Manuel D’Utilisation

En

Use to connect headphones. When the 
headphones are connected, there is no sound 
output from the speakers.

AUTO SURR/ALC/STREAM DIRECT – 
Switches between Auto Surround (page 53), 
Auto level control mode and Stream Direct 
mode (page 56).

STEREO – Switches between stereo 
playback, and Front Stage Surround 
Advance modes (page 55).

ADVANCED SURROUND – Use to switch 
between the various surround modes 
(page 54).

STANDARD SURROUND – Press for 
Standard decoding and to switch between 
the various 

2 Pro Logic IIx and Neo:6 

options (page 53).

11 SPEAKERS
Use to change the speaker system (page 69).

12 MULTI-ZONE controls
If you’ve made MULTI-ZONE connections (see 
MULTI-ZONE setup on page 31) use these 
controls to control the sub zone from the main 
zone (see 

13 iPod/iPhone/USB, VIDEO INPUT 
terminals
Use to connect your Apple iPod as an audio 
and video source, or connect a USB device for 
audio and photo playback (page 34, 35).

See 

14 MCACC SETUP MIC jack
Use to connect the supplied microphone 
(page 37).

Light to indicate the currently selected input 
signal. 

AUTO lights when the receiver is set to 

select the input signal automatically (page 58).

Light to indicate the channels being input 
when PCM signals are being input. They do not 
indicate the audio signals being output from 
the receiver.

L/R – Left front/Right front channel
C – Center channel
SL/SR – Left surround/Right surround channel
LFE – Low frequency effects channel (the ((   )) 
indicators light when an LFE signal is being input)
XL/XR – Two channels other than the ones above
XC – Either one channel other than the ones above, 
the mono surround channel or matrix encode flag

Light when a signal encoded in the corresponding 
format is detected.

2

2

2

VSX-1019_KU.book  Page 9  Thursday, January 8, 2009  12:01 PM