Pioneer AVM-P9000 Manuel D’Utilisation

Power source  ...... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system  .................................... Negative type
Max. current consumption

Backup current  ................................................ 10 A
Accessory current  .............................................. 4 A

Dimensions ................ 307 (W) 

× 51 (H) × 187 (D) mm

Weight .................................................................. 2.5 kg

Continuous power output is 22 W per channel min. into
4 ohms, both channels driven 50 to 15,000 Hz with no
more than 5% THD.
Maximum power output  .................................. 45 W 

× 6

Load impedance ........................ 4 

Ω (4 – 8 Ω allowable)

Preout maximum output level/output 

impedance .............................................. 2.2 V/1 k

Ω

Decoder

.... Linear PCM/Dolby Digital/Dolby Pro Logic/DTS

Equalizer (3-Band Parametric Equalizer)

(Low)  ...................... Frequency: 40/80/100/160 Hz
(Mid)  ........................Frequency: 200/500/1k/2k Hz
(High)  .............. Frequency: 3.15k/8k/10k/12.5k Hz
Level  ............................................................ ±12 dB  

Subwoofer output

Crossover frequency .......... 63 Hz, 100 Hz, 200 Hz
Level ............................................................ ±10 dB

Speaker setting

Time Alignment ...................... 0 – 500 cm (2.5 cm)
Level ............................................................ ±10 dB
Equalizer ............................................ Band: 3 Band

Frequency: 100/125/160/200/250/315/

400/500/630/800/1k/1.25k/

1.6k/2k/2.5k/3.15k/4k/

5k/6.3k/8k Hz

Gain: ±12 dB

Crossover frequency: 63, 100, 200 Hz

Frequency range .................................... 87.5 – 108 MHz
Usable sensitivity .................................................. 10 dBf

(0.9 µV/75 

Ω, mono, S/N: 30 dB)

50 dB quieting sensitivity  .................................... 15 dBf

(1.5 µV/75 

Ω, mono)

Signal-to-noise ratio .................. 70 dB (IEC-A network)
Distortion  ...................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response  .................. 30 – 15,000 Hz (±3 dB)
Stereo separation  .................... 40 dB (at 65 dBf, 1 kHz)

Frequency range  ...................... 531 – 1,602 kHz (9 kHz)

530 – 1,710 kHz (10 kHz)

Usable sensitivity  ............................ 18 µV (S/N: 20 dB)
Selectivity  .............................................. 50 dB (±9 kHz)

50 dB (±10 kHz)

Composit input level  ........................................ 1 V/75 

Ω

PAL/SECAM/NTSC Compatible

Composit output level  ...................................... 1 V/75 

Ω

PAL/SECAM/NTSC Directly Through Input 

• Specifications and the design are subject to 

possible modification without notice due to
improvements.