Pioneer AVM-P9000R Manuel D’Utilisation
93
ENG/MASTER 98
94
The power switch does not
work.
No functions come on.
work.
No functions come on.
The remote control does
not work.
not work.
No sounds are heard.
The volume level will not
rise.
The volume level will not
rise.
Cables or connectors are not
correctly connected.
correctly connected.
The fuse is broken.
The battery power is running
out.
out.
The remote control is not in the
correct operation mode.
correct operation mode.
Cables are not connected correctly.
The volume is turned all the
way down.
way down.
The front, rear, left and right
speakers are not properly
adjusted in level balance.
speakers are not properly
adjusted in level balance.
Check whether the cables are
plugged in correctly and firmly.
plugged in correctly and firmly.
Remove the cause of the break-
ing of the fuse, then replace the
fuse. Be very sure the same
rated proper fuse is installed.
ing of the fuse, then replace the
fuse. Be very sure the same
rated proper fuse is installed.
Replace the batteries.
(See page 8.)
(See page 8.)
Switch the remote control to the
proper mode. (See page 3.)
proper mode. (See page 3.)
Connect the cables correctly.
Increase the volume.
(See page 10.)
(See page 10.)
Adjust the relative levels
between the speakers correctly.
(See page 67.)
between the speakers correctly.
(See page 67.)
Troubleshooting
7 General
Symptom
Cause
Remedy
If the problem still
remains.
remains.
Request repairs.
\
If the problem
remains even after
checking.
remains even after
checking.
Reset the unit. (See
page 7.)
page 7.)
\
If you think there is
something wrong
with the unit.
something wrong
with the unit.
Before requesting
repairs, check the
following chart.
repairs, check the
following chart.
Troubleshooting
CRB1585A/Eng/066-097 08-06-2000 14:51 Page 94