Sony STR-DH810 Manuel D’Utilisation

V/v repeatedly to select 

• START: The S-AIR main unit starts 

pairing. “SEARCHING” flashes on the 
display.

• CONDITION: You can check the 

current ID. When the pairing setting is 
not made, “NO PAIRING” appears on 
the display.

Refer to the operating instructions 
supplied with the surround amplifier and 
S-AIR receiver respectively.

“COMPLETE” appears on the display.

Press MENU/HOME or AMP MENU.

Perform the pairing within several minutes after you 
select “START” in step 6. Otherwise, the pairing is 
canceled automatically and “INCOMPLETE” 
appears on the display.

Reset the ID of the S-AIR main unit.
For details, see “To set the ID of the S-AIR 
main unit” (page 62). You can select the same 
ID as before.

(For the S-AIR receiver only (not 
supplied))
You can enjoy the system’s sound in another 
room by using the S-AIR receiver. The S-AIR 
receiver can be placed in another room for 
enjoying the system’s sound there.
For details of the S-AIR receiver, refer to the 
operating instructions supplied with the S-AIR 
receiver.

• To set the ID of the S-AIR main unit, 

• To set the ID of the S-AIR receiver, 

refer to the operating instructions 
supplied with the S-AIR receiver.

• When you are using another S-AIR sub unit, 

such as a surround amplifier, do not change 
the ID of the S-AIR main unit. Set the ID of 
the S-AIR receiver to match the ID of the 

 

S-AIR main unit.

• When you pair the S-AIR main unit and 

another S-AIR sub unit, such as a surround 
amplifier, you also need to pair the S-AIR 
main unit and the S-AIR receiver. For details, 
see “Pairing the S-AIR main unit with a 
specific S-AIR sub unit (Pairing operation)” 
(page 63).

O

AMP 
MENU

,

 

V/v/B/b