Sony STR-DN2010 Manuel D’Utilisation
62
GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm
masterpage: Left
STR-DN2010
4-182-049-11(1)
1
Press GUI MODE.
After “GUI ON” appears on the display
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press
V/v repeatedly to select
“
FM” or “
AM”, then press
or
b.
The FM or AM menu list appears on the
TV screen.
TV screen.
3
Press
V/v repeatedly to select
“Auto Tuning”, then press
.
4
Press
V/v.
Press
V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
reception
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
using Auto Tuning, Direct Tuning
2
Press TOOLS/OPTIONS.
3
Press
V/v repeatedly to select “FM Mode”,
then press
or
b.
4
Press
V/v repeatedly to select “Mono”, then
press .
You can enter the frequency of a station
directly by using the numeric buttons.
directly by using the numeric buttons.
1
Press GUI MODE.
After “GUI ON” appears on the display
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press
V/v repeatedly to select
“
FM” or “
AM”, then press
or
b.
The FM or AM menu list appears on the
TV screen.
TV screen.
3
Press
V/v repeatedly to select
“Direct Tuning”, then press
.
4
Press SHIFT, then press
numeric buttons to enter the
frequency.
numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Select 1
Select 1
b 0 b 2 b 5 (b 0*)
Example 2: AM 1,350 kHz
Select 1
Select 1
b 3 b 5 b 0
* Press 0 for European model only.
Tip
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
5
Press .
If you cannot tune in a station
“– – – .– – MHz” appears and then the screen
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 4. If you still
cannot tune in a station, the frequency is not
used in your area.
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 4. If you still
cannot tune in a station, the frequency is not
used in your area.
Tuning into a station
automatically (Auto Tuning)
automatically (Auto Tuning)
FM
AM
Tuning into a station directly
(Direct Tuning)
(Direct Tuning)
FM
AM