Soundstream Technologies SA.244 Manuel D’Utilisation

To assure maximum output from your amplifier, use high quality, low-loss power

and ground cables. Soundstream SA amplifiers incorporate gold-plated barrier
strips for maximum power transfer and protection from corrosion. The screw

terminals back out 

for use with spade & ring terminals, as well as bare 

wire.

Determine from the chart below the minimum gauge power and ground wire for

your application.

Soundstream Power80

Soundstream Power80

or 

 00

 

 or 8 or 10 ga.)

Soundstream Power80

 

Soundstream Power80

 

Like all other amplifiers, the Soundstream 

 must be fused near the

battery. A fuse or circuit breaker must be located within 18” of the battery. This

will prevent a fire in the event of a shorted cable. See the chart below to

determine the 

 

25 amp automotive

30 amp

30 amp automotive

30 amp automotive

40 amp

40 amp

on page 15)

from page 14)

The Soundstream amplifiers are fused internally with automotive-type fuses.
The fuses are accessible 

on the bottom of the amplifier. Never

Connect the ‘Remote” to the turn-on lead from the source unit. 

 

 volts

is received, the amplifier will 

 on.

Depending on your application and amplifier 

 244, or 

 you may

use one, two, or three pairs of signal cables to drive your amplifier. To
guarantee optimum performance, use a high-quality cable that will be easy to
install and has minimal signal loss.

Use a high quality, flexible, multi-strand cable for best performance and

longevity. Soundstream Speaker120 & 160 (12   16 gauge) are ideal.