QSC Audio 6.0 II Manuel D’Utilisation
9
SETUP- AC Power Requirements
AC Power
Before connecting the amplifier to the AC
mains, check the serial number plate to
verify operating voltage.
mains, check the serial number plate to
verify operating voltage.
The PL6.0 II is available in 120 or 240 Volt
models. Make sure the AC mains voltage is
the same as specified on the serial number
plate.
models. Make sure the AC mains voltage is
the same as specified on the serial number
plate.
120 Volt models have the AC cordset hard-
wired to the chassis. 240 Volt models have
an IEC-style detachable cordset.
wired to the chassis. 240 Volt models have
an IEC-style detachable cordset.
Do not use improper AC
mains voltage! It can
create hazardous condi-
tions and severely dam-
age the amplifier!
mains voltage! It can
create hazardous condi-
tions and severely dam-
age the amplifier!
The PL6.0 II is a very high-power amplifier and as such can demand high current
from the AC service. All connections must be properly rated for reliable operation.
from the AC service. All connections must be properly rated for reliable operation.
Use of extension cords is discouraged. If extension cords must be used, use only
heavy-duty 10 gauge extension cords that are as short as possible.
heavy-duty 10 gauge extension cords that are as short as possible.
AC Power Connection
120 Volt Models
NEMA L5-30 Receptacle
Connect the 30 Amp twist-lock connectors by
orienting the locking L-shaped prong with the
corresponding connector entry, then fully insert
the three prongs. Twist the plug about 1/8 of a
turn clockwise to lock the connector and plug.
NEMA L5-30 Receptacle
Connect the 30 Amp twist-lock connectors by
orienting the locking L-shaped prong with the
corresponding connector entry, then fully insert
the three prongs. Twist the plug about 1/8 of a
turn clockwise to lock the connector and plug.
240 Volt Models
European 3-conductor Earthing Receptacle
Insert the plug fully into the receptacle.
European 3-conductor Earthing Receptacle
Insert the plug fully into the receptacle.