Sigma EQ Station Manuel D’Utilisation

The I/O button gives access to adjust LoCut and I/O levels.
Select of function and adjustment is done with the ADJUST
wheel and ARROW keys.

Press COMPARE to compare current settings with the
settings from the loaded preset.
A - is the settings from the stored preset. 
B - is the adjusted preset.

If the Edited indication is not present in the display, and
pressing the A/B button does not change graphic EQ
values, current settings are the unmodified preset values.
As soon as you change a fader-value, the Edited flag will
appear.

The A/B compare only affects the Graphic EQ part of the
processing.

The OK button is used to confirm destructive operations
such as the reset of “All” and “Group” settings, as well as
the “Paste” function. When confirmation is needed this will
be indicated in the display.

The ADJUST wheel is used to change parameter values.

Use the arrow CURSOR keys for general navigation and
adjustment on the Motofader display, e.g. for adjusting
levels and LoCut.

29 high-quality 60mm motorized faders, covering
frequencies from 31Hz to 20kHz is the main adjustment
section. The faders move fast and precisely, giving a truly
reliable picture of the Graphic EQ settings for selected
channel(s).