Denon AV SURROUND PRE-AMPLIFIER Manuel D’Utilisation

• In the initial status, USB memory devices can be used by connecting them to the USB port on the front panel.
• To change the port to be used, see “USB Select” on page 49.
• For instructions on playing the files on a USB memory device, see page 69, 70.

• Set to the USB port you want to use.
• The AVP-A1HDCI is equipped with two USB ports, one each on the front and rear panels. It is not possible to use the set with USB memory 

devices connected to both the ports at the same time. Select the USB port you want to use at the GUI menu “Source Select” – “NET/USB” 
– “Playback Mode” – “USB Select”.

• Do not use the extension cable for connecting the USB memory deveice to the AVP-A1HDCI’s USB port.
  Use of the extension cable may cause harmful interference.

n

n

Keep the power cord unplugged until the XM Mini-Tuner and Home 
Dock connection have been completed.

• The AVP-A1HDCI is an XM Ready

®

 receiver. You can receive XM

®

 

Satellite Radio by connecting to the XM Mini-Tuner and Home Dock 
(includes home antenna, each sold separately) and subscribing to the 
XM service.

• Plug the XM Mini-Tuner and Home Dock into the XM connector on 

the rear panel.

• Position  the  Home  Dock  antenna  near  a  south-facing  window  to 

receive the best signal.

  For details, see “Listening to XM Satellite Radio Programs” (vpage 

61).

  When making connections, also refer to the operating instructions of 

the XM Mini-Tuner and Home Dock.

• The XM name and related logo are registered trademarks of XM 

Satellite Radio Inc. All rights reserved.

• XM Ready is a registered trademark of XM Satellite Radio Inc. All 

rights reserved.