KTI Networks Managed Fast Ethernet switches KSD-800M Fascicule
Codes de produits
KSD-800M
Specifications :
Industrial Managed 8-Port Fast Ethernet
Switches with Fiber Connectivity
Benefits :
Fast Ethernet switch with 8 10/100Mbps copper ports and optional fiber ports
Wide operating temperature range for temperature critical environment
Support DIN rail mounting and panel mounting
Provide two power input types to meet more application needs
Accept wide power input voltage range for application flexibility
Special functions - VLAN, QoS, Port control
SNMP, telnet, Web management support
Industrial-rated Emission and Immunity performance
Key Features :
8 10/100M ports support auto-negotiation and auto-MDI/MDI-X configuration
Port 7 and Port 8 provide either copper or fiber connection (model dependent)
Provides wire speed store-and-forward switching
Supports IEEE 802.3x flow control for full-duplex operation
Supports Back-pressure flow control for half-duplex operation
Provides Far End Fault function on the fiber ports
Provides port-based, 802.1Q tag-based VLAN function
Provides port-based, 802.1p, DSCP QoS function
SNMP, telnet, Web management support
Supports industrial redundant ring configuration for quick recovery from cable fault or switch
failure
Standard
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, 100Base-FX
Network Ports
8 RJ-45 10/100Mbps auto-negotiation, auto-MDI/MDI-X ports
2 100Mbps 100Base-FX ports (model depedent)
(Port 7 and Port 8 provide dual connectivities, either copper or fiber.)
Network Cables
10Base-T : Cat. 3, 4, 5 or higher up to 100m
100Base-TX : Cat. 5 or higher up to 100m
100Base-FX : MMF 50/125µm 60/125µm, SMF 9/125µm
VLAN function
Port-based, IEEE 802.1Q Tag-based
QoS function
Port-based, 802.1p-based, DSCP-based, IP match-based
Management
SNMP MIB-II and private MIB, telnet, web, event traps
MAC Addresses
Table with 1K entries
LEDs
Per unit :
Power, Management
Per 10/100M port : Link/Activity, 100M, Duplex/Collision status
Per fiber port slot : Link/Activity status status
Relay Output
Alarm :
Power failure
Interface : 2 terminal contacts
Spec. :
30VDC/1A max. or 120VAC/0.5A max.
KSD-800M
Backup
link
Redundant Ring Configuration
Panel Mounting Bracket
080110