Ampeg SVP1600 Manuel D’Utilisation

Ampeg reserves the right to change specifications without notice.

P/N 47-617-51 • 091103

Technical Specifications

OUTPUT POWER RATING

1600 Watts Mono-Bridged @ 4 Ohms (1200 Watts Continuous)

1200 Watts Mono-Bridged @ 8 Ohms (900 Watts Continuous)

2 x 900 Watts @ 2 Ohms (600 Watts Continuous)

2 x 625 Watts @ 4 Ohms (490 Watts Continuous)

2 x 350 Watts @ 8 Ohms (300 Watts Continuous)

FREQUENCY RESPONSE

-3dB @ 25Hz and 50kHz

TOTAL HARMONIC DISTORTION

5% @ full power

SLEW RATE

> 30V/µs (stereo)

SIGNAL TO NOISE RATIO

> 90dB typical

INPUT IMPEDANCE

220k ohm

INPUT SENSITIVITY

0.5V RMS

DAMPING FACTOR

> 300

OUTPUT CONNECTIONS

(2) 1/4” phone jacks, (1) Speakon

per channel; (1) Speakon

for Mono Bridge

PROTECTION CIRCUITRY

Over-temp and Current Limited

COOLING

Internal fan

POWER REQUIREMENTS

120VAC, 60Hz, 1.4kVA

100/115VAC 50/60Hz, 1.4kVA

240VAC, 50/60Hz, 1.4kVA

SIZE AND WEIGHT

19/17.4”W x 5.6”H (with feet) x 15.5”D; 39 lbs

SVP1600 Stereo Bass Power Amplifier

www.ampeg.com

Declaration Of Conformity

#32, Effective 01-01-2001

Manufacturer’s Name:

SLM Electronics

Production Facility:

1901 Congressional Drive, St. Louis, MO 63146, USA

Production Facility:

700 Hwy 202 W, Yellville, AR 72687, USA

Shipping Facility:

1400 Ferguson Ave., St. Louis, MO 63133, USA

Office Facility:

1400 Ferguson Ave., St. Louis, MO 63133, USA

Product Type:

Audio Amplifier

Complies with the following Standards:

Safety:

EN60065, E60065, C22.2, UL6500 and/or UL813

EMC:

Directive 89/336/EEC, EN55103, EN55013, EN61000,
and/or FCC 47CFR 15B clA

Supplementary information provided by:

SLM Electronics - R & D Engineering

1901 Congressional Drive, St Louis, MO 63146, USA

Tel.: 314-569-0141, Fax: 314-569-0175