Boston Acoustics SoundWare XL Manuel D’Utilisation
E
n
g
l
i
s
h
Description
The Boston Acoustics® SoundWare XL is truly a go everywhere, do everything speaker. All of its parts
are weather resistant so they’re at home indoors and out, in situations from outdoor entertainment to
home theater systems.
are weather resistant so they’re at home indoors and out, in situations from outdoor entertainment to
home theater systems.
The reasonable size and flexible mounting system of the SoundWare XL give you many options
for installation locations. You can just set them on a shelf or use the supplied brackets and mount
them in a corner or on a flat wall. The pivoting mounts let you tilt and swivel the speakers to suit
the installation. If one of the available colors doesn’t work in your décor, then SoundWare XL can be
painted in a matching or complementary color.
for installation locations. You can just set them on a shelf or use the supplied brackets and mount
them in a corner or on a flat wall. The pivoting mounts let you tilt and swivel the speakers to suit
the installation. If one of the available colors doesn’t work in your décor, then SoundWare XL can be
painted in a matching or complementary color.
In addition the SoundWare XL has a built-in transformer that allows it to be used in conventional
audio systems or 100V/70V Constant Voltage systems. So they are well suited for multi-speaker
commercial installations.
audio systems or 100V/70V Constant Voltage systems. So they are well suited for multi-speaker
commercial installations.
specifications
Frequency Response
70Hz-25kHz (±3dB)
Recommended Amp Power
15 – 150 watts
Nominal Impedance
8 ohms
Sensitivity
86dB
Woofer
6
1
⁄
2
” (165mm) Driver
Tweeter
1” (25mm) dome
Crossover Frequency
2kHz
Net Weight
8.4 lbs (3.9kg)
Dimensions (H x W x D)
7
7
⁄
8
x 7
7
⁄
8
x 8
9
⁄
16
” (201 x 201 x 217mm)
Placement Options
The SoundWare XL speaker can be wall mounted using the supplied hardware or simply placed on a
shelf. If it is being placed on a shelf you can simply attach the adhesive-backed rubber feet and
connect the speaker wires.
shelf. If it is being placed on a shelf you can simply attach the adhesive-backed rubber feet and
connect the speaker wires.
Attaching the Pivoting Ball Mount
If you plan to use the mounting brackets you must
attach the pivoting ball mount to the speaker. Use the
four supplied flat-head machine screws as shown in the
illustration.
attach the pivoting ball mount to the speaker. Use the
four supplied flat-head machine screws as shown in the
illustration.
142-003539-0_SoundWare_XL_Manual.indd 2
9/9/08 5:56:27 PM