Crown Audio CTs 3000 Manuel D’Utilisation
-1-
INSTALLATION INSTRUCTIONS FOR MODELS AMR6-2570 AND AMR6-100
ADJUSTABLE POWER LOUDSPEAKERS
Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death to you or others.
serious injury, or death to you or others.
SAFETY MESSAGE TO INSTALLERS
Peoples lives depend on your safe installation of our products. It is important to follow all
instructions shipped with the products. This device is to be installed by a trained electrician who is
thoroughly familiar with the National Electric Code and will follow the NEC guidelines as well as
local codes.
thoroughly familiar with the National Electric Code and will follow the NEC guidelines as well as
local codes.
The selection of the mounting location for the device, its controls and routing of the wiring is to
be accomplished under the direction of the Facilities Engineer and the Safety Engineer. In addition,
listed below are some other important safety instructions and precautions you should follow:
listed below are some other important safety instructions and precautions you should follow:
•
This unit should be installed by a qualified electrician in accordance with NFPA 72,
and national and local Electrical and Fire Codes, under the direction of the
authority having jurisdiction.
and national and local Electrical and Fire Codes, under the direction of the
authority having jurisdiction.
•
If the unit is not installed in a supervisory system, it must be tested at regular
intervals. Refer to NFPA 72 and the local Fire Codes for this information.
intervals. Refer to NFPA 72 and the local Fire Codes for this information.
•
Read and understand all instructions before installing or operating this equipment.
•
Do not connect this unit to the system when power is on.
•
All quality speakers of this size and type are capable of producing loud sounds
which may cause, in certain situations, permanent hearing loss. You should take
appropriate precautions such as wearing hearing protection.
which may cause, in certain situations, permanent hearing loss. You should take
appropriate precautions such as wearing hearing protection.
•
After installation, test the sound system to ensure proper operation.
•
All quality speakers of this size and type are capable of producing loud sounds,
which may cause, in certain situations, permanent hearing loss. The device should
be installed far enough away from potential listeners to limit their exposure while
still maintaining its effectiveness. The OSHA Code of Federal Regulations 1910.95
Noise Standard provides guidelines, which may be used regarding permissible
noise exposure levels.
which may cause, in certain situations, permanent hearing loss. The device should
be installed far enough away from potential listeners to limit their exposure while
still maintaining its effectiveness. The OSHA Code of Federal Regulations 1910.95
Noise Standard provides guidelines, which may be used regarding permissible
noise exposure levels.
•
Show these instructions to your Safety Engineer and then file them in a safe place
and refer to them when maintaining and/or reinstalling the unit.
and refer to them when maintaining and/or reinstalling the unit.
•
Establish a procedure to routinely check the sound system for proper activation
and operation.
and operation.
•
Consult the authority having jurisdiction in your area regarding the proper use
and installation of this product.
and installation of this product.
A. GENERAL.
The Model AMR6-2570 loudspeaker is Underwriters Laboratories Listed for “Fire Protective
Signaling Use” (category designations UUMW, UEAY, and UEAY7) and the Model AMR6-100 is
Listed for “General Signaling Use” (category designations UEAY, and UEAY7). Both loudspeaker
models are UL listed for use in return air ceiling plenum spaces.
Listed for “General Signaling Use” (category designations UEAY, and UEAY7). Both loudspeaker
models are UL listed for use in return air ceiling plenum spaces.
The 25/70 volt model includes an in-line capacitor to provide the isolation necessary for
supervisory use. The 25/ 70 volt model is designed to reproduce electronically generated warning
tones that command rapid recognition of emergency alerting signals. In addition, both loudspeaker
models can reproduce tones, full range voice communication and background music.
tones that command rapid recognition of emergency alerting signals. In addition, both loudspeaker
models can reproduce tones, full range voice communication and background music.