Epson 503c Manuel D’Utilisation
12
Setting Up the Projector
Connecting to a Laptop Computer
You can connect the PowerLite projector to any computer that has a
standard video output (monitor) port, including PC notebook and
laptop computers, Macintosh PowerBooks, and hand-held devices.
standard video output (monitor) port, including PC notebook and
laptop computers, Macintosh PowerBooks, and hand-held devices.
Connecting the Computer Cable
Before you start, make sure your computer and the projector are
turned off.
turned off.
1. Connect one end of the computer cable to the projector’s
Computer
port.
2. Connect the other end of the computer cable to your laptop’s
video-out or monitor port.
If you’re using a PowerBook and you can’t connect the cable, you
may need to use the Macintosh desktop adapter as shown on
page 77 (available from EPSON; see page 8).
may need to use the Macintosh desktop adapter as shown on
page 77 (available from EPSON; see page 8).
3. Tighten the screws on the connectors.
note
To connect to desktops and
other computer systems, see
Appendix A. If you have an
iBook with an RCA video-
out port, follow the
instructions for connecting to
a video device on page 15.
other computer systems, see
Appendix A. If you have an
iBook with an RCA video-
out port, follow the
instructions for connecting to
a video device on page 15.
note
Laptop configurations vary.
See your computer manual for
the location of the ports
needed to connect your
projector.
See your computer manual for
the location of the ports
needed to connect your
projector.