Epson 503c Manuel D’Utilisation

You can connect a DVD player, VCR, camcorder, laser disc player, 
digital camera, or any other compatible video source to your projector.

The projector supports NTSC, PAL, and SECAM, and automatically 
detects the video format. 

A standard RCA A/V cable is included with the 
projector. If your video source also has an S-video 
jack (as shown with an S-video plug at the right), 
you can use it to provide a higher quality video image. However, 
you’ll need an S-video cable, which may be included with your video 
source, or may be purchased from an electronics store or video dealer.

Follow the instructions below for your type of connection. 

Before starting, make sure the projector and your DVD player or 
other video source are turned off.

1. Connect the yellow plug on one end of the A/V cable to the 

projector’s 

Video

 jack. Then connect the audio plugs to the left 

and right 

Audio

 jacks (insert the white plug into the 

L

 port and 

the red plug into the 

R

 port).

2. Connect the plugs on the other end of the cable to the video-out 

and audio output jacks on your video source.

4

2

3

1

Video jack

RCA A/V cable

L

 port

R

 port