Epson 503c Manuel D’Utilisation
44
Fine-tuning the Projector
5. Use the
Enter
button to make your selections.
6. When you’re finished customizing the highlighting tools, press
Esc
or
Menu
. Your selection(s) are saved.
Creating Your Own Startup Screen
You can transfer any image on your computer to the projector, and
then use it as the screen displayed when the projector is not receiving a
signal. You can also set it to be displayed when you press the
then use it as the screen displayed when the projector is not receiving a
signal. You can also set it to be displayed when you press the
A/V Mute
button, or as a startup screen. The image can be a company
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use on the projector. You
can use an image from either a computer or video source such as a
VCR or digital camera. Then follow these steps to capture the image
and transfer it to the projector:
can use an image from either a computer or video source such as a
VCR or digital camera. Then follow these steps to capture the image
and transfer it to the projector:
1. Press the
Menu
button on the remote control. You see the main
menu.
2. Use the
Enter
button to highlight the
User’s Logo
menu.
3. Press
Enter
to select it. You see the message shown at the left.
4. Select
Yes
and press
Enter
. A selection box displays over the
image.