Turbosound LMS-A6 Manuel D’Utilisation
user manual
LMS-A6
LMS-A6 user manual
Page 7
REAR PANEL FUNCTIONS
1. Mains Power
Mains Power
Mains Power
Mains Power - Connected via a standard IEC socket. A compatible power cord is supplied with
the unit.
the unit.
2. Power Switch
Power Switch
Power Switch
Power Switch.
3. Mains Fuse
Mains Fuse
Mains Fuse
Mains Fuse - Located in a finger-proof fuseholder adjacent to the mains inlet. Always replace
this fuse with the correct type as shown on the rear panel legend.
this fuse with the correct type as shown on the rear panel legend.
4. Remote Standby connector –
Remote Standby connector –
Remote Standby connector –
Remote Standby connector – for remote switch connection.
5. XLR Outputs
XLR Outputs
XLR Outputs
XLR Outputs - 3 pin male XLR connectors are provided for each audio output. All terminations
are fully balanced, pin 2 Hot, pin 3 Cold and pin 1 Screen (shield).
are fully balanced, pin 2 Hot, pin 3 Cold and pin 1 Screen (shield).
6. Limiter threshold –
Limiter threshold –
Limiter threshold –
Limiter threshold – sets limiter threshold for each output band.
7. XLR Inputs
XLR Inputs
XLR Inputs
XLR Inputs – 3 pin female XLR connectors are provided for each audio input. All terminations
are fully balanced, pin 2 Hot, pin 3 Cold and pin 1 Screen (shield).
are fully balanced, pin 2 Hot, pin 3 Cold and pin 1 Screen (shield).
ALWAYS USE SAFETY GROUND
AC 50/60Hz 40VA
S.No 10 - 1001 - A
NO USER SERVICEABLE PARTS INSIDE
230V
2
3
4
5
6
7
1