Turbosound 65T Fascicule

 

•  The loudspeaker connections are provided as an integral part of the wall bracket. 

•  Site the bracket on to the mounting surface, making sure there is sufficient free travel 

vertically and horizontally to allow full angle adjustment of the loudspeaker, and feed 
the speaker cables through the main bracket assembly from the rear. 

•  Fix the wall bracket securely to the mounting surface using appropriate fixings. The 

correct hole spacing and bracket orientation are shown here.  

•  Terminate the speaker cable by stripping to length and connecting to the bracket 

assembly, ensuring correct polarity. The right terminal is positive (+ve) and the left 
terminal is negative (-ve).  

•  Offer the loudspeaker up to the bracket and lock into place with a downward motion. 

This action automatically closes the electrical connections. 

•  Angle the loudspeaker as required and lock the bracket using the 6mm Allen key 

provided. 

•  When installing IMPACT loudspeakers with CB-10, WB-10 or OmniMount™ 

brackets you will need to terminate the cables directly at the loudspeaker terminal 
as shown. 

 

LS-35 

3.5” low frequency driver for IMPACT35/35T 

LS-50 

5” low frequency driver for IMPACT55T 

LS-51 

5” low frequency driver for IMPACT65T 

TW-52 

High frequency tweeter for IMPACT35/35T/55T/65T 

WB-5 

Adjustable plastic wall bracket 

WB-10 

Adjustable steel wall bracket 

CB-10 

Adjustable steel ceiling bracket 

 

Turbosound Ltd, Star Road West Sussex RH13 8RY, United Kingdom 
tel: +44(0)1403 711447  fax: +44(0)1403 710155  www.turbosound.com 
version 1.1 

73mm [2.9"]

97mm

[3.8"]

+ve

ve