Yamaha RX-V459 Manuel D’Utilisation
37
USING OTHER FEATURES
BA
S
IC
OPE
R
A
T
IO
N
English
The “DIRECT STEREO” mode allows sources to bypass
the decoders and DSP processors of this unit so that you
can enjoy pure hi-fi sound from 2-channel PCM and
analog sources.
the decoders and DSP processors of this unit so that you
can enjoy pure hi-fi sound from 2-channel PCM and
analog sources.
Press AMP on the remote control and then press
DIRECT ST. on the remote control to select
“DIRECT STEREO”.
DIRECT ST. on the remote control to select
“DIRECT STEREO”.
• To avoid unexpected noise, do not play CDs encoded in DTS
when the “DIRECT STEREO” mode is selected.
• When multi-channel signals (Dolby Digital and DTS) are input,
this unit automatically switches to the corresponding analog
input. When “DTS” is selected as the input mode (see page 32),
no sound will be output.
input. When “DTS” is selected as the input mode (see page 32),
no sound will be output.
page 70) settings (except for speaker level settings) are not
effective.
effective.
• The front panel display automatically dims.
y
You can also select the “DIRECT STEREO” mode by pressing
the PROGRAM l / h buttons on the front panel repeatedly.
the PROGRAM l / h buttons on the front panel repeatedly.
You can display the format, sampling frequency, channel,
bit rate, and flag data of the current input signal.
bit rate, and flag data of the current input signal.
1
Press one of the input selector buttons to
select the desired input source.
select the desired input source.
2
Press AMP on the remote control and then
press STRAIGHT on the remote control to
select “STRAIGHT”.
press STRAIGHT on the remote control to
select “STRAIGHT”.
3
Press
u
/
d
to display the information about
the input signal.
Enjoying pure hi-fi stereo sound
Notes
AMP
DIRECT ST.
8
DIRECT STEREO
Displaying the input source
information
information
CD
MD/CD-R
TUNER
V-AUX
DVD
DVR
DTV/CBL
STRAIGHT
ENT.
AMP
STRAIGHT
PRESET/CH
ENTER
A/B/C/D/E
A/B/C/D/E