Yamaha RX-V459 Manuel D’Utilisation

Recording adjustments and other operations are performed from the recording components. Refer to the operating 
instructions for those components.

• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• The setting of the TONE CONTROL (see page 30), VOLUME, the speaker level (see page 71) and the sound field programs 

(see page 54) do not affect recorded material.

• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
• S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing 

video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an 
S-video or a composite video signal on your VCR.

• Digital signals input at the DIGITAL INPUT jacks are not output at the analog OUT (REC) jacks for recording.
• A given input source is not output on the same OUT (REC) channel.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright 

laws.

y

Do a test recording before you start an actual recording.

If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture 
itself may be disturbed due to those signals.

l

h

l

h