Yamaha RX-595 Manuel D’Utilisation
7
BASIC OPERATIONS
TO PLAY A SOURCE
1
Set to the “
∞
” position.
2
Turn the power on.
3
Select a desired input source.
(For video sources, turn the TV/monitor ON.)
(For video sources, turn the TV/monitor ON.)
*
The name of the selected input source position will appear
in the display. (For “TUNER”, the tuning mode will appear
in the display.)
in the display. (For “TUNER”, the tuning mode will appear
in the display.)
*
Note that selecting each input source position accesses
the source which is connected to the corresponding input
terminals on the rear panel.
the source which is connected to the corresponding input
terminals on the rear panel.
4
Select the speakers to be used.
*
If you use two speaker systems, press both the A and B
switches.
switches.
5
Play the source. (For detailed information on the tuning
operation, refer to page 10.)
operation, refer to page 10.)
6
Adjust to the desired output level.
7
If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (Refer to page 9.)
LOUDNESS controls, etc. (Refer to page 9.)
To turn off the power
Press the POWER switch again.
1, 6
7
2
4
7
3
VOLUME
l6
l8
20
24
28
34
40
50
60
70
l4
l2
l0
8
6
4
3
2
l
0
–dB
POWER
INPUT
LD/TV
VCR/
TAPE 2
TAPE 2
TAPE 1
TUNER
CD
PHONO
SPEAKERS
A
ON
OFF
B
ON
OFF
VOLUME
l6
l8
20
24
28
34
40
50
60
70
l4
l2
l0
8
6
4
3
2
l
0
–dB