Yamaha DVR-S150 Manuel D’Utilisation

Page de 99
84
Troubleshooting
Disc playback
Problem
Cause
Solution
Some button operations do 
not work
Some discs do not support certain 
CinemaStation functions.
Playback does not start or 
stops immediately when 
pressing 
h
The disc may not be set in the disc 
tray properly.
Set the disc in the disc tray properly.
The disc may be dirty.
Wipe the disc clean.
The disc loaded into the 
CinemaStation may be not 
compatible.
Make sure you use a disc supported by 
the CinemaStation. (page 32)
When moved the CinemaStation 
from a cold place to warm one, 
condensation may be form on the 
disc reading lens.
Wait for one to two hours, then try 
again.
An audio or subtitle 
language does not switch
The disc may not support the multi-
language feature.
Make sure you use a disc that supports 
the multi-language feature.
No subtitles appear
The subtitle may be set to “None”.
Select a subtitle language you want to 
display. (page 40)
The disc may not contain subtitle 
data.
Make sure you use a disc with subtitle 
data.
When using the A-B Repeat function, 
the subtitle may not appear at the 
parts other than the selected section.
Cancel the A-B Repeat function. 
(page 38)
A viewing angle does not 
switch
The disc may not support the multi-
angle feature.
Make sure you use a disc that supports 
the multi-angle feature.
DVD videos cannot be 
copied with the VCR
You may be trying to copy a copy-
protected DVD.
Most commercially available DVDs 
include copy protect features. You 
cannot make a copy of these DVDs.
Picture looks poor
In some cases, picture may look poor 
while fast forwarding or reversing, 
but this is not a defect.
The TV shows no picture or 
its screen size looks 
strange
In the On-Screen Menu, the Picture 
settings may be improper.
Adjust the Picture settings in the On-
Screen Menu. (page 29)
The Progressive Scan mode may be 
used with a TV that does not support 
it.
Turn off the Progressive Scan mode. 
(page 46)
The TV shows overlapped 
picture partly
The disc content does not match the 
Progressive Scan mode due to the 
editing method or other conditions.
Turn off the Progressive Scan mode. 
(page 46)
Status information does not 
appear
In the On-Screen Menu, the Status 
window may be set to “Off”.
Set the Status window to “On” in the 
On-Screen Menu. (page 29)
The disc is ejected without 
an operation
The disc loaded into the 
CinemaStation may be not 
compatible.
Make sure you use a disc supported by 
the CinemaStation. (page 32)
The message “No Disc” 
appears in the 
CinemaStation display even 
though a disc is inserted
The disc may not be set in the disc 
tray.
Set the disc in the disc tray properly.