Technics SA-DX1050 Manuel D’Utilisation
How to use the antenna plug (included)
Two types of wire are most commonly used for connection from
the antenna: 300
the antenna: 300
Ω
parallel feeder wire or 75
Ω
coaxial cable. For
best resistance to outside interference, the use of 75
Ω
coaxial
cable is suggested.
¡
¡
To connect a 75
Ω
coaxial cable
q
Remove a piece of the outer vinyl insulator.
w
Carefully pull the tabs apart to remove the cover.
e
Remove the lead wire and clamp it with the plastic bar.
r
Install the coaxial cable.
Clamp the cable conductor, and wind it on so that it doesn’t
contact anything else.
Clamp the cable conductor, and wind it on so that it doesn’t
contact anything else.
t
Attach the cover.
¡
¡
To connect a 300
Ω
feeder wire
Loosen the screws, connect the wires, and tighten the screws to
secure the connection.
secure the connection.
Only for Australia and New Zealand
R
A
L
FRONT
R B L
FRONT
R
L
SURROUND
CENTER
LEURS
AC IN
LOOP ANT
HOLDER
TV
VCR1
S-VIDEO
MONITOR
OUT
TV
TV
MONITOR
COAXIAL
OPTICAL2
(DVD)
OPTICAL1
(TV)
VCR1
IN
(OUT)
PLAY
(IN)
REC
(OUT)
R
L
GND
DIGITAL IN
FM
ANT
ANT
AM
ANT
ANT
75
Ω
EXT
CD
PHONO
TAPE
OUT
IN
LOOP
9
RQT5802
Connections
Connecting the AC mains lead and other information
FM outdoor antenna
¡
Disconnect the FM indoor antenna.
¡
The antenna should be installed by a competent technician.
[Only for the United Kingdom]
Antenna plug (included)
Antenna plug (included)
e
To household
mains socket
mains socket
c
Cooling fan
The cooling fan operates at
high power output levels only.
The cooling fan operates at
high power output levels only.
a
FM outdoor anntena
b
75
Ω
coaxial cable
d
AC mains lead
(included)
(included)
FM outdoor anntena
300
Ω
feeder wire
75
Ω
coaxial
cable
cable
Antenna plug (included)
a
20 mm
10 mm
Lead wire
Plastic bar
Press down with pliers.
300
Ω
feeder wire
(not included)
For Australia and New Zealand
AC mains lead
Connect this lead only after all other cables
and cords are connected.
and cords are connected.
The included AC mains lead is for use with
this unit only. Do not use it with other
equipment.
this unit only. Do not use it with other
equipment.
Insertion of Connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front
part of the connector may jut out as shown in
the drawing.
However there is no problem using the unit.
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front
part of the connector may jut out as shown in
the drawing.
However there is no problem using the unit.
Note
h
Appliance inlet
g
Approx. 6 mm
f
Connector
(FOR THE UNITED KINGDOM ONLY)
READ THE CAUTION FOR THE
AC MAINS LEAD ON PAGE 4
BEFORE CONNECTION.
AC MAINS LEAD ON PAGE 4
BEFORE CONNECTION.
For Europe