JVC LVT1990-006C Manuel D’Utilisation
13
Ba
sic ope
rat
io
ns
This function allows you to easily understand dia-
log recorded on the disc/file even with the volume
down low. This function is useful when you are
watching a movie.
log recorded on the disc/file even with the volume
down low. This function is useful when you are
watching a movie.
Press [C.VOICE] while holding down
[SHIFT].
[SHIFT].
• Each time you press [C.VOICE], the setting
turns on and off.
NOTE
• “C.VOICE” refers to “clear voice”.
• “C.VOICE” refers to “clear voice”.
You can listen to surround sound via headphones
connected to the [PHONES] terminal.
connected to the [PHONES] terminal.
■When headphones are connected to the
[PHONES] terminal
Press [3D P/HPS] while holding down
[SHIFT].
[SHIFT].
• Each time you press [3D P/HPS], the setting
turns on and off.
NOTE
• The [PHONES] terminal is for connecting a pair
• The [PHONES] terminal is for connecting a pair
of headphones equipped with a stereo mini plug
(not supplied). When headphones are con-
nected, no sound is output from the speakers.
(not supplied). When headphones are con-
nected, no sound is output from the speakers.
• This function does not work for a JPEG, ASF,
DivX, MPEG1 or MPEG2 file.
• “HPS” refers to “headphone surround”.
You can set the clock when the main unit is on or
off.
off.
1
Press [CLOCK/TIMER] repeatedly
to select the clock in the display
window.
to select the clock in the display
window.
2
Press or to select the hour.
3
Press [ENTER/SET].
4
Press or to select the minute.
5
Press [ENTER/SET].
• The clock starts from 0 seconds in the
minute you set.
NOTE
• While setting the clock, you can return to the
• While setting the clock, you can return to the
previous step by pressing [CANCEL] or you can
stop the setting by pressing [CLOCK/TIMER].
stop the setting by pressing [CLOCK/TIMER].
• To adjust the clock, press [CLOCK/TIMER]
repeatedly until the clock appears in the display
window, and then press [ENTER/SET]. The fol-
lowing procedure is the same as steps 2 to 5.
window, and then press [ENTER/SET]. The fol-
lowing procedure is the same as steps 2 to 5.
• Press [DISPLAY/CHARA] to display the clock
when using this system. (Refer to page 21.)
• The clock gains or loses approximately 1 minute
per month.
• If the power cable of the main unit is discon-
nected from the AC outlet or the power is inter-
rupted, the clock setting is lost. Set the clock
again.
rupted, the clock setting is lost. Set the clock
again.
Sharpening the voice sound
Selecting the headphone
surround mode
surround mode
Setting the clock
Basic operations (continued)
UX-GN7V[US]EN-04.fm Page 13 Wednesday, April 8, 2009 10:26 AM