JVC CA-MXDK15 Manuel D’Utilisation

Changing the Picture Tone

While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
settings.

To select a preset picture tone

While playing, display VFP setting screen.

Select a preset picture tone.

To adjust the picture tone

Select “USER1” or “USER2.”

• Follow steps

and

explained above.

Select a parameter you want to adjust.

Adjust the parameter.

Repeat steps

to adjust other parameters.

To remove the setting screen,

while holding SHIFT, press

VFP again. The screen will automatically be erased after 9
seconds even if you do not press VFP.

Changing the Display Brightness

You can dim the display window.

Setting the Clock

• To exit from the clock setting, press CLOCK/TIMER as

required.

• To go back to the previous step, while holding SHIFT,

press CANCEL.

Activate clock setting mode.

• If you have already adjusted the clock before, press the

button repeatedly until the clock time starts flashing.

Adjust the hour, then minute.

To check the current time when the System is turned on

NORMAL

Normally select this.

CINEMA

Suitable for a movie source.

USER1/USER2

You can adjust parameters and can
store the settings (see below).

GAMMA

Adjust if the neutral color is bright or
dark (–3 to +3).

BRIGHTNESS

Adjust if the picture is bright or dark
as a whole (–8 to +8).

CONTRAST

Adjust if the far and near positions
are unnatural (–7 to +7).

SATURATION

Adjust if the picture is whitish or
blackish (–7 to +7).

TINT

Adjust if human skin color is
unnatural (–7 to +7).

SHARPNESS

Adjust if the picture is indistinct (–8
to +8).

Remote
ONLY

On the TV screen

NORMAL

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

(While holding...)

NORMAL

CINEMA

USER2

USER1

Remote
ONLY

DIMMER ON

DIMMER OFF

(Normal)

(While holding...)

INFO

Remote
ONLY

(While holding...)

MX_DK5_3_1.book Page 14 Tuesday, February 7, 2006 11:49 AM