Samsung AH68-00939B Manuel D’Utilisation

Page de 29
GB
23
If the timer switch on and off times are identical, the word 
ERROR
is
displayed.
The timer enables you to switch the system on or off at 
specific times.
Example:
You wish to wake up to music every morning.
If you no longer want the system to be switched on or off 
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock until       
TIMER
is displayed.
Press Return/Enter.
Result:
ON TIME
is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b   Press Return/Enter.
Result: The minutes flash.
c  Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Return/Enter.
Result:
OFF TIME
is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Return/Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Return/Enter.
Result:
VOL XX
is displayed, where 
XX
corresponds to the 
volume already set.
Press Tuning Down and Up to adjust the volume level and press 
Return/Enter.
Result: The source to be selected is displayed.
Turn the Multi Jog knob to select the source to be played when the
system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of
the decks before setting the 
system to standby.
TUNER (radio)
a  Press Return/Enter.
b  Select the 
FM
or 
AM
frequency
band by tuning the Multi Jog
knob to the right or to the left.
c  Press Return/Enter.
d  Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
CD (compact disc)
a  Load one or more compact discs.
b  Select the required disc.
Press Return/Enter to confirm the timer.
Press On/Standby to set the system to standby mode.
Result: 
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
Timer Function
Volume
+
_
On/Standby
Mul
ti Function
Multi Jog
Demo
Timer
/Clock
Timer
On/Off
Mono/ST
REC/Pause
Down
PREV.
Next
Normal 
Dubbing
HI - Speed
CD
Synchro
Program
Shuffle
Return/Enter
CD
Repeat
Preset/
Memory
Deck 1/2
REV.Mode
VCD/CD
AUX
TAPE
TUNER
Band
D / P / S
DIRECT PLAY & SELECTION
CD–R/RW PLAYBACK
Up
Tuning Mode
AI Sleep
MIC Mixing 
Echo
MIC 1
MIC 2
MIN
MAX
Down
PREV.
Next
Up
7
8
9
5
6
1
2
3
4
1,9
2
6
6
4,5,7
3,4,5,6,7,8
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Press Timer On/Off...
Cancel the timer
Once.
Result:      is no longer displayed.
Restart the timer 
Twice.
Result:      is displayed again.
Cancelling the Timer
On/Standby
1
2
3
4
5
6
7
8
9
TAPE
AI Sleep
Deck 1/2
Return
CD Repeat
Slow
Sound
Key Control
Zoom
+10/0
Mono/ST.
Mute
Disc Skip
VCD / CD
#
b
Timer
 
On/Off
Counter
 Reset
Disc 
View
Time 
Search
Band
To set the timer function
You may use Multi Jog or 
buttons to adjust in step 4,
567.
 MAX-VL69GB-19~29  11/11/02 4:46 PM  Page 23