Roland VS-20 Manuel D’Utilisation

From initial settings to recording

As described below, configure Guitar Tracks 4 so that you can use the V-STUDIO 20 hardware as an audio driver.

• Immediately after installing V-STUDIO 20

• If  you've  newly  installed  the  VS-20 driver, or updated the driver

Choose “Options | Audio” to display the “Audio Options” dialog box in Guitar Tracks 4.

fig.front01.eps

Click the “ASIO Panel” Button.

The VS-20 Driver Settings dialogue box will be shown.

If you are trying to eliminate “pops” and “clicks” in what you hear, try 

setting the “Audio Buffer Size” to “8” or higher by moving the slider to 
the right.

When you have finished setting the Audio Buffer Size to the desired 
setting, click “OK” to close the VS-20 Driver Settings Dialogue.

In the “Audio Options” dialogue, click “Apply” and “OK” to close. You will 

not need to restart Guitar Tracks in order for these changes to take effect.

Click “OK” to close the dialog box.

If the screen indicates “Audio Driver Error”, click [Use Anyway].

* If the window does not close or the settings are not applied when you click [OK], refer to “Problems When Installing 

Guitar Tracks 4 or Changing Settings” (p. 36).

Audio Driver Settings

Setting up Audio Devices

1.

Is the driver installed correctly?

2.

Did you connect the VS-20 Hardware before launching Guitar Tracks 4?

Refer to “Installing the VS-20 Driver” (p. 11), and verify that the VS-20 driver is installed 
correctly.

3.

Is the V-STUDIO 20 hardware correctly connected to your computer?

VS-20_e.book  24 ページ  ２０１０年１月１８日　月曜日　午前９時８分